Jump to content
SAU Community

Recommended Posts

Hi. Im thinking of spending $5k on my R33 GTS-t. So far it has POD, 3" zaust from turbo, 'cooler and is lowered with mags.

Any suggestion as to what to spend this $5k on? i admit i dont know much about this stuff, but was thinking maybe new turbo, injectors, fuel pump, computer etc. does anyone have any advice about this stuff? brands, sizes etc.

thanks for any help.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/
Share on other sites

Hey mate i have a turbo package that would suit you, its only $1000,00. Which includes turbo, waste gate, all braided lines and chrome rfittings to suit, also comes with a hks pod filter and custom turbo blanket. That would leave you with $4000 and you could get a power fc and hi flowed injectors fitted and tuned for $2500. Than get a fuel pump bout $400 fitted and than the use the rest to set up the turbo it come with a factory warranty as well. Just a thought i can send u pics of the turbo if you like.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1238258
Share on other sites

nengun had a gtrs for rb25 kit for $4500 i think it was. powerfc, boost controller kit, gtrs turbo, injectors all fittings and gaskets etc. would be well suited. however you would still need a clutch, good tyres and a set of cams for more midrange power. the gtrs on rb25 can do around 260rwkw (ish) check out rb25 turbo upgrade thread a few months ago.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1238292
Share on other sites

I just did the gtrs $2912, 6 nismo 555cc injectors $939, power fc and boost kit $1510 + $250 shipping got 270rwkw at 1.2 bar and good response. Also need z32 airflow meter $295 and dyno tune and installation. But you could do it with out the z32 and injectors and keep the boost a bit lower and keep it under 250rwkw.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1239876
Share on other sites

I just did the gtrs $2912, 6 nismo 555cc injectors $939, power fc and boost kit $1510 + $250 shipping got 270rwkw at 1.2 bar and good response. Also need z32 airflow meter $295 and dyno tune and installation. But you could do it with out the z32 and injectors and keep the boost a bit lower and keep it under 250rwkw and do the rest later.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1239881
Share on other sites

HD Clutch =$1200 installed

exhaust side adjustable cam gear - $250 installed

PFC + boost controller kit= $1500 + fitted & tune ($400)

Borch Fuel Pump $350 installed

gcg BB high flow - 1800 installed

220rwkw should not be a problem

once u got the $$ for injector and head gasket 250+ is achivable

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1240082
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...