Jump to content
SAU Community

Recommended Posts

Hi all!

Can anyone recommend a good clutch for a r33 gtst that can handle approx 300rwkw? I've been looking around, but everything seems soo expensive!! The car is used for alot of traffic driving, and for drags and track work. So it has to be pretty resilient! The last clutch I had was an exedy twin plate and it only lasted me 1 year!!! Its not worth spending another 2.5k if thats all the wear i'm going to get from it :P

Also, can people PM me their experiences with Jim Berry in QLD? (good and bad) as i was also considering asking him to build me one...

Any help would be appreciated!!!

Mona

Link to comment
https://www.sau.com.au/forums/topic/66924-clutch-for-r33-gtst/
Share on other sites

I havent used Jim yet, a lot of the guys I race with on weekends at Qld Raceway have had Jim build clutches for them, and they cannot speak highly enough of his service and expertise. I won't hesitate to send my 33 there when a new clutch is needed. Just my $0.02 worth.....

Go Jim Berry. Im getting a clutch built by him at the moment. Ive done my research and i havent heard anything bad about him. I spoke to him for an hour on the phone and he knows his shit! Why dont you ring him and ask if he can rebuild your clutch? 07 3847999.

Shaun.

go to any clutch shop and ask them, the clutch should not be expensive especially since its a push type... dont bother getting a button clutch or even twin plate its not necessary...

a good organic full face clutch would do the job and be easy to use (only bad thing is the pedal will be heavy!)

i had a pretty heavy duty clutch in my old r33, it was from racebrakes and it cost 250 for the clutch kit and 300 for fitting just as a guide.

OK, just got off the phone with race brakes in melbourne:

Entire kit for R33 GTS-t

Full faced organic with heavy duty pressure plate, + release bearing = $580

Then there was some other kit with a ceramic coating??? and sprung centre (it wasn't a button ceramic clutch, but I was told it has plenty of bite, and is much more streetable) = $650 (again, entire kit)

Ok guys... I ended up getting a 4puk, ceramic sports clutch! clutch plus fit was $1250. I went with Western Clutches at St Marys! Big thumbs up to those guys!!! They were very helpful and managed to fit me in on short notice! :D

I did want to go with jim berry, but it was going to take to long and i couldn't afford to have the car off the road :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...