Jump to content
SAU Community

Recommended Posts

you just watched the GTR special DVD didn't ya? :) There was an article on it in an Australian mag (HPI) a while back including the specs... one of the members on here scanned it and posted it up. Might be worth asking for that article.

Link to comment
https://www.sau.com.au/forums/topic/67336-mines-r34-specs/#findComment-1249832
Share on other sites

  • 2 weeks later...

Get someone/babel to translate this: http://www.mines-wave.com/

I was after similar specs/ideas but ive heard its cheaper to try buying the actual car than getting the parts sent over etc if you want the exact same performance. Others have just bought an engine with turbos + Mines ECU and get everything else like handling work done locally.

Link to comment
https://www.sau.com.au/forums/topic/67336-mines-r34-specs/#findComment-1270612
Share on other sites

thanxs for the help guys ill get that translated asap

as for the r34 in the states not on my coast i haven't seen any ... yet

i have heard of quite a few in california imported thru motorex but

they wouldn't have had one ready for 4 months and only r33s and r32s

but i found one in new york its just getting the finshing touches on it and should be done the entire conversion in just a couple of weeks.

then shes all mine its an r33 gt-r v-spec i can't wait its just getting to spring and the east coast show circuit is just getting started so hopefully the plans i have for it will be finished by sema time

if anyone knows where i can get a carbon fiber trunk lid for an r33 shipped to the us it would also be very helpful

once again thanxs for the help guys ill get some pics up when i get it in hand

:D

Link to comment
https://www.sau.com.au/forums/topic/67336-mines-r34-specs/#findComment-1274812
Share on other sites

from the mines r34 best motoring avi:

mines complete engine stage 2

hks gt2530 turbines

big capacity airflow kit

vk rom

vx silence pro titanium exhaust

suspension esta suspension kit

esta link kit

brakes original ap brake kit

tires potenza re5405 255/35/r18

Link to comment
https://www.sau.com.au/forums/topic/67336-mines-r34-specs/#findComment-1280781
Share on other sites

the one im getting is an r33 gt-r v-spec i would love to have an r34 but the budget didn't quite allow for it but...

I do have anothe 15 or 20k to mod it with so it should be fun, the reason i was looking for the mines upgrades is because i wanted to see what their major bolt ons were. In hopes to keep the same type of engine response thinking as the r34 in the best motoring avi.

right now the only thing i havent been able to find that im going to start with is a carbon fiber trunk lid (the search continues).

but thanks for all the helpful info and i promise as soon as i pick it up ill throw some pics up here for you guys.

p.s. also looking at picking up a pulsar gti-r for 11gs u.s. its a 96 i think all stock i know it has an sr20det and its awd but other than that im clueless are they hard to make serious horsepower out of?

thanxs again guys and if anyone comes across the elusive carbon fiber trunk lid i would be greatly appreciated. :bananaman

Link to comment
https://www.sau.com.au/forums/topic/67336-mines-r34-specs/#findComment-1282400
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...