Jump to content
SAU Community

Recommended Posts

Yea-ha. But r33 rb25de, r33 rb25det, r34 rb25de or r34 rb25det? Obviously not a r32 rb25de as vct has been 'disabled'. The bolt patterns on all of those should be the same, but I'm trying to work out why the inlet on his is different.

I am told its an R33 RB25det head.

The inlet cam has all that VCT crap on the front of the wheel. I havent seen this myself, but my mate who was putting the cam gear on said once he pulled the VCT stuff off there was just a single bolt straight down the guts of the cam gear holding it to the cam shaft... I thought this was weird as i thought they have 4 bolts plus a locating stud?

any more info?

Then you might have to try and fit a non-VVT inlet camshaft.

I'm not sure an adjustable cam wheel is so useful - on "standard" DE engines, the degree of adjustment is so small for the gains obtained that it's almost not worth the effort, IMHO. But it might be different on a RB30DE setup. And anyway, as I understand it, changing the cam timing simply shifts the power band, it doesn't necessarily improve it.

Putting in reground GTR cams will allow removal of the VCT, without the issue of the solid lifter ramp angles on the cams and giving a little extra lift. So then you get higher lift cams, and can use a vernier cam gear to beter take advantage of the higher lift.

I think i'll have to go look at it myself and possibly take some photos as i havent heard of anyone mentioning this problem before.

Blind_elk: Its not naturally aspirated, its got a GT35r hanging off the side of it :)

Edit: I am wanting to put Tomei Poncams into it, so this may solve my problems.. But i am unsure how the Tomei cams will go in a 3L application... As they are made to work with the VCT it concerns me that they might not be suitable for the RB30DET setup

I am told its an R33 RB25det head.

The inlet cam has all that VCT crap on the front of the wheel. I havent seen this myself, but my mate who was putting the cam gear on said once he pulled the VCT stuff off there was just a single bolt straight down the guts of the cam gear holding it to the cam shaft... I thought this was weird as i thought they have 4 bolts plus a locating stud?

any more info?

It should have 4 bolts. This is mine:

20041013_stand_IMG0909_1024.jpg

I didn't fit mine myself, so it's entirely possible that the workshop made an adpater to make it fit, but I seriosuly doubt it. Get around to your engine and take a close look at it yourself.

WTF, that isn't an RB25det inlet cam front end. It isn't even an RB25 by the looks. RB30/31det as a guess from the tensioner location above the water pump and the amount of block above the pump. Were those cams custom? :(

The poncams would likely take the VCT cam gear so would leave you with the same deal, but I am no expert on them so get another opinion, but the improvement of the poncams alone would be worth the effort.

skylinegeoff, as I mentioned earlier, I am using a r33 rb25det head. You are quite correct about the block, not that it has much relevance for this topic.

I posted the pic so someone could tell us if mine has been modified to fit a cam gear on intake. I was never told otherwise when it was fitted. How does it compare to a standard cam inlet front end? They are factory r33 rb25det cams on intake and exhaust.

OK just to clarify, standard inlet cams will not have 4 bolts to locate the cam gear but a single one for the VCT gear. It also incorporates the seal surface on the cam gear. That one must have been modified. A bit of an expense for bugger all improvement when a GTR set that will take the vernier cam gears can be reground to suit RB25 with hydraulic lifters for $280 plus shipping at Ivan Tighe in Brisbane (one of the forum members works there). the added bonus with GTR cams is the added lift and duration giving a greater top end performance. Without the regrind the 25 has nothing under 5K rpm, as I fitted a set for a day to see for myself the effect.

That is, by the way a nice looking engine.

thizzle, are the 20 cams made with the same lift and duration? I never wasted any time to find out.

Davey Boy how is your vehicle going?

The RB25VVT inlet cam is the only one with a different front out of all the RB cams. It is a single bolt front with a locating dowel.

I make adjustable centres to bolt on which use the standard outer to make it adjustable. Its quite easy and all you need is a different seal ($6) and a shorter bolt without a hole in it ($Stuff all) and loctite the bolt in so oil doesn't get past. You're looking at $120 incl GST at a guess. Call me on my mobile if you still have the number or at work.

si if i was to purchase a set of Tomei pon cams will i experience the same problem with the inlet cam shaft being a different bolt pattern?

Lukey boy: How can I bolt on my HKS adj cam gear to the inlet... the simplest and easiest method?

I am wanting to put a set of cams into this motor, but I want to know what is going to work on the motor... Your thoughts on the Tomei cams for RB25det ?

Car is being re-assembled and have hit this problem now... trying to sort it out.. All these slow downs shite me off :(

Oh yeah need something else PMing you

EDIT: looks like PM is down

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...