Jump to content
SAU Community

Recommended Posts

  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

My current best time for the stock challenge for this week (Using an '04 Lotus Elise 111R, with no modifications and 'Medium' Compound sports tyres) is 8:27.426... this wasn't a very clean run at all, so u guys should be able to beat it easily :P

Update: Knocked a few Hundredths of a second off down to:

8:27.079

ok so this weeks car is the "'04 Lotus Elise 111R" ...everyone happy??

same deal, arcade mode, medium street tyres, no drivers aid.

LET THE RACING BEGIN!!

Arcade Mode

Lotus Elise 111R '04

Stock

Sports Medium Tyres

No Assists

I got a 8'01.408 on my first attempt with a big stuff up at the end.

1002362he.th.jpg

Like most MR cars I use the 'Point and shoot' technique, lift off and the weight transfers to the front which makes the rear get loose, once you have it pointing in the direction you want you gas it and a ton of weight returns to the rear for awesome traction....... FUN

Some corners are hard because you have to lift off and brake hard while there is a slight bend which causes the rear to get very loose, it this situation I tap the throttle quickly while still braking for quick burst of weight transfer to the rear to keep it inline.. like I said fun stuff but damn scary in real life.

damn ur good viper...i got 8'7:15 eating grass in the last part too:D  how tail happy is this car u can litterally powerslide into corners which is fun.

Thanks, the reason I buggered the last corners it because the car became unstable when heavy braking around that slight left hander before the last three 90 degree corners, damn thing give me a FR or 4WD :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
    • With ordering the belt, you're doing water pump and the idler and tensioner at the same time too yes?
    • This is just a dumb way of keeping the wastegate closed to make more boost. Undo it and either follow the factory setup or redo it properly. Manual boost controllers just use a spring preload to determine when to close in response to boost pressure so it no longer vents to atmosphere.
    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
×
×
  • Create New...