Jump to content
SAU Community

Recommended Posts

  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

My current best time for the stock challenge for this week (Using an '04 Lotus Elise 111R, with no modifications and 'Medium' Compound sports tyres) is 8:27.426... this wasn't a very clean run at all, so u guys should be able to beat it easily :P

Update: Knocked a few Hundredths of a second off down to:

8:27.079

ok so this weeks car is the "'04 Lotus Elise 111R" ...everyone happy??

same deal, arcade mode, medium street tyres, no drivers aid.

LET THE RACING BEGIN!!

Arcade Mode

Lotus Elise 111R '04

Stock

Sports Medium Tyres

No Assists

I got a 8'01.408 on my first attempt with a big stuff up at the end.

1002362he.th.jpg

Like most MR cars I use the 'Point and shoot' technique, lift off and the weight transfers to the front which makes the rear get loose, once you have it pointing in the direction you want you gas it and a ton of weight returns to the rear for awesome traction....... FUN

Some corners are hard because you have to lift off and brake hard while there is a slight bend which causes the rear to get very loose, it this situation I tap the throttle quickly while still braking for quick burst of weight transfer to the rear to keep it inline.. like I said fun stuff but damn scary in real life.

damn ur good viper...i got 8'7:15 eating grass in the last part too:D  how tail happy is this car u can litterally powerslide into corners which is fun.

Thanks, the reason I buggered the last corners it because the car became unstable when heavy braking around that slight left hander before the last three 90 degree corners, damn thing give me a FR or 4WD :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...