Jump to content
SAU Community

Recommended Posts

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

Guest two.06l

ok boys this is Stace here

Enough whoring of my thread!! Lets talk about my beautiful car again, I was really enjoying it!

BTW adrian, I just saw an ad for "Power cruise" on the TV, and I'm quite concerned, dont really think it's my cup of tea! Or, then again maybe I should register for the jelly wrestling.

heres the torque graph

torque_graph.JPG

synergy 8000 and octane booster

new boost controller and race fuel tuning friday week

will post results.

Thanks for the reply, that's some awesome torque (800nm).

Well done, bring on the 500awkw with racing fuel.

:D:rant::):)

Car looks like a million bucks! *thumbs up*

I love the work and attention to detail, and I hope that after I pour money and time into mine that it will be as clean and tidy. :D

I see you've decided to make it look like a gst-t with a gtr body kit. Because as we all know, 98% of GTR's without the badge are actually hyped up 16 year old kids in their body kitted gts-t's. :rant:

Keep up the good work.

Finally TWO.06L is back in action, new look, new wheels, new paint, new brakes and with a new TRUST 4" exhaust and 405 awkw, a new attitude. Its been very hard to have her off the road but the final result is more than worth it. Hope you like it.  

9881gtr5.JPG

Congratulations S & P! Now that's gotta be one of the sexiest sights around:is there anything better than a iron fist wrapped in a velvet glove?! It's only my opinion(which I often get told to shove sideways somewhere dark :rofl: ),but I reckon that THIS is how a GT-R should look! I've had my baby up on blocks for 5 weeks,and I'm going slightly :looney: waiting for my suspension to come back-you must've been going absolutely :bananaman :crazy: :gaga: :freak: waiting for this to happen... Worth the wait,I say!! TWO.06L lives again!!

Guest two.06l
I see you've decided to make it look like a gst-t with a gtr body kit. Because as we all know, 98% of GTR's without the badge are actually hyped up 16 year old kids in their body kitted gts-t's. :rofl:

Making the car look like a 16yr olds gts-t was the last thing we wanted. It looks like a tough GTR minus the badging. Nothing more, nothing less.

Stace - looks good :(  I think the front ride height needs to come down a bit though (or mayby mine is just too low! :( ) I'm not sold on the clear indicators...

That is some pretty impressive power you are producing!

Car looks awsome!

incredible power

Wheels really set it off they looked a bit like TE37's because of the colour!

agree not a fan of those indicators reckon the standard look heaps better well on my grey gtr they do anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...