Jump to content
SAU Community

$30 Dyno Runs! - Chip Control Mini Dyno Day 4th April

RBN1

By RBN1,
in Archived Events

 Share

Recommended Posts

RBN1 Mentor

RBN1

Posted
Posted

hi guys,

Chip Control - the company that is sponsoring my R32 N1 GTR race car is holding a mini dyno day on 9th April. Why so cheap? Well Scott Hendren the owner has replaced his old dyno with a brand new Dyno Dynamics Dyno and wants to give it a bit of a run.

All you have to do is go to http://www.chipcontrol.com.au register on the forums and send Scott an e-mail letting him know that you are coming.

Note : there will be no tuning just 2WD dyno runs and Chip Control is located in Sunbury. I will post more specific info like times etc early next week.

Also i've corrected the date to Sat 9th April

A note from Chip Control-

"We are looking at starting the day at about 9.00am,

Dyno runs will be in the order of arrival,

On the day Photos will be taken of your vehicle and pasted in the picture gallery for public viewing.

You will all receive a Dyno print-out of your run.

You will have a choice in how you want your power graph to display.

For example: AFR, Torque etc.

We'll see you all on the day. "

Shivam.

Al Grand Master

Al

Posted
Posted

I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me. Not bad from a person that is trying to organise their first event with SAU.

RBN1 Mentor

RBN1

Posted
  • Author
Posted
I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me.  Not bad from a person that is trying to organise their first event with SAU.

Al, he was kidding around. Take it easy. He wasn't trying to organise anything for SAU. I thought it would be beneficial for our guys to get a $30 dyno run. Please try and organise something cheaper if you think you can.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      New R32 owner soon

      By joshuaho96 · Posted

      Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man · Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man · Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...