Jump to content
SAU Community

Recommended Posts

Hay guys i have been talking to afew poeple =) about cars more towards imports.

afew guys i was talking to say that you can bend the chassis just by hitting a gutter etc. =)

and they were saying that when u buy a car from japan even if they say it hasnt had any accidents there no way of the inspectors or whoever is there to tell if its been cut and shut chassis damage etc =)

now i wanted to ask you guys how bad is this stuff.

if your chassis has been damaged. not talking about hitting a poll or whatever if its in an accident etc

if they were to straghten it back up will your car be the same?

handle to same drive the same etc =)

tell me your thoughts hehe

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/
Share on other sites

if u get a wheel alignment done front and back before you buy the car they can tell there and then if the car is bent!

this is what i was told anyways....and ours checked out alright

:(

btw...you dont want a car with a bent chassis, it will handle like shit and when you brake, the car will pull to one side....you can also tell if the car turns better in one direction than another.

also...check the subframes which hold the suspension, this can also cause the problems listed above...

hope this helps in some way

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102100
Share on other sites

Or just buy your skyline from a reputable importer not a dogy backyard guy.

The auctions in japan use xray analysis on the chassis which indicates when a car has been repaired. The results are evident in the auction grade of the car in question

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102272
Share on other sites

I found a little while ago that one of the chassis (?) rails was a bit crushed and one of my sills has a dent in it, I think this may have happened a one of the services I've had....

The car still drives good and nothing was mentioned when I upgraded the shocks and wheel alignments have been done with no problems. I think someone would have said it needed fixing if it was a problem..

Don't know if this is the sort of info you were after??

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102320
Share on other sites

Originally posted by hippy

boosted?? so i think i might have that problem ... what can i do to rectify it?? that is the problem with the shitty handling and steering problem as well as the car pulling to one side when braking.

My 180sx had wheel adjustment problems. I couldnt get the camber on the left straight at all. Finally a friend discovered the car had a bent chassis and they never straighten it up properly.

I took it to a friend who fixed it beautifully.

Bent chassis arent that bad. Anything these days is fixable. Its up to you if you are the worrying type. Better off as Nick says going to a reputable importer. But if you dont mind things like that then it isnt that bad.

Needless to say but the 180sx was perfect after that.

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102509
Share on other sites

Originally posted by hippy

so how do i go about fixing it?? who can i get to do it for me and what does this kind of work involve?? cause i 've had an accident with the car already ... so that could of made it worse ...

A reputable smash repairer.

Trust me they know and can fix it, its their job.

All the best my friend

Minh

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102540
Share on other sites

Guest LoudBlueBMW

If there is damage to the chassis and it is corrected properly then by all means it should steer, handle, etc as well as before, but keep in mind the properties of metal and how if you bend it one way then another it will weaken it somewhat. Correcting minor damage shouldn't really pose a problem, but if the car has had major accident repair, think about the next time the car cops a hit, will the driver be so lucky? That's why a lot of people that have accidents in cars and get them repaired will sell the cars afterwards.

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-103222
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...