Jump to content
SAU Community

Recommended Posts

Hi..

Not happy today...

On my way back from the cotter with a mate, heading thro warramanga as i came thro one corner, something flung up into my rear guards and bounce of with a ching sound... went back and there was a bolt left on the ground pikced it up just incase, the bolt was threaded as well so i thought it was either bad, or just not mine...

About 200m up the road as i went around the roundabout, the car just drops and vears to the right. when i look at it the L/F wheels has a camber like -45Deg. Not a pretty site...

So what happend is the control arm bolts fell out and the car fell down... Spend a bit of time on the side of the road trying to get 1 bolt back in after trying to jack it up(bodykit in the way)

So i managed to get a bolt in and drive slowly home...

called stu at Capital steering and his has now sent a tow truck out.

My blame goes to capital steering as they threaded the bolts when they fitted the part.(Camberkit) im just glad i hadnt of been doin 100Km/h around a corner at the time it fell... as i could of ended up nasty.

So im not a very happy chappy! and sounds like i aint cruising tomorrow night. :D;):rant::rant::rant::rant::rant::rant:

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/
Share on other sites

Truck just came and took my baby away...

I took the front bar off, so i dont have any probs some of you guys had.

Do panel damage.. not sure whether the shock is damaged as there was alot of weight pushed up against it.. but well see when i get a phoen call.

Yes... inline should of been the go

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1287665
Share on other sites

the car arrived in the shop, and they assesed it...

All is good, there fixing it all up "for free" was some young guys fault which now doesnt work there.. There goin over the whole suspension, realignment everything, even offerin to pick me up when its finished.. And the best news, i get it back tomorrow.

So im happier now, but still pissed that it happened.

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1288346
Share on other sites

I'm just glad to hear they are fixing the weapon mate, its what they should do - and thinking themselves lucky it didn't hurt anyone when it happend. It way to hot a '32 to be off the road!

It could've been a lot worse. Some companys will do nothing as I've found.

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1289279
Share on other sites

I thought that Capital steering were supposed to be good?? I go to Chris at Inline in Queanbeyan, theres no one I trust more, I actually once saw Jim Richards Targa rally Porsche GT3 in there being fixed once... Chris is undoubtedly the best and if you know him he's pretty inexpensive...

BTW what were you doing in Bungendore Andrew??

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1289462
Share on other sites

Good news guys.. you dant have to loose anymore sleep over my car..

Cars back, all fixed up, have to take it back in 1000km to re check...but all sorted for now...

just a lil scared to take it fast around corners now. :S

Bungendore... coming back from a mates farm.:P

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1289849
Share on other sites

Like I said last night Andrew... Get it checked out by someone else (namely Chris at Inline) cos if there is some major damage that they have bodged up so that you wont notice Chris will find it... Im not dumping on Capital Steering, they're mostly pretty good, Im just saying that it happens and dont take any chances with that hot car of yours :P

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1290286
Share on other sites

I have had about 20 cars done at Capital and never had a problem, I think it is testimate to them they fixed it all without argument, they could have just said sh.t happens!!! I used Inline on my own GTR and was very unhappy with mainly the service and the unkept promises related to the time it was going to take and when it was going to be finished, but others swear by him....The moral is everyone has bad opinions and bad experiences with everywhere!!! the best thing you can do I believe is look at how long they have been in business and if you feel you can trust the place that does work on your car, if you go to their workshop (regardless of profession) and get the feeling they will treat your car sh.t trust that feeling in my opinion!!!

Good luck with the car should be sweet now!!!

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1291011
Share on other sites

The reason Chris takes a while to do cars is cos he wont let them out of there unless he is completly confident that they're done right... He just puts in al bit more time and effort and I dont know what you mean about the service, I have never had a problem with him, he's just about the friendliest guy Ive met.

I havent been to Capital Steering so I cant judge them, but there is in mine and all my mates opinions no better place to take you car than Inline, oh and he's been in business for over 20 years.

Link to comment
https://www.sau.com.au/forums/topic/69596-pissed-off/#findComment-1296732
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...