Jump to content
SAU Community

Big in the rear but small in the front end?

monkeykplunk
 Share

Recommended Posts

monkeykplunk Mentor

monkeykplunk

Posted
Posted

Ok, so I need new tyres as the ones on the rear are pretty much at indicators on the inside of both tyres.

At the moment I'm running 255/40 17 on the rear and 235/45 17 on the front.

I've gotten some really good prices off people I know, but I thought I'd check em out against prices just over the phone with shops.

I got one old bloke who asks me why the hell I would want to run 255's with a 235 on the front.

He carried on for a while about how having such a large tyre on the rear will put more pressure on the front of the car and make things like the front suspension work harder and stuff it in the long run.

Then he tells me that I won't get any decent mileage out of any tyre anyway, so I may as well just buy cheap ones instead of spending my moeny on expensive things that won't be any better.

Whilst I ignored his banter at the time and wondered why he wouldn't just give me a price on what I asked for and take my money instead of talkign me out of something and into something cheaper, he got me thinking.....

Is there any truth to what he was saying about the front having to work harder and thus ****ing other things by having larger tyres on the rear?

Or was he just full of bullshit?

nmcmahon83 Proficient

nmcmahon83

Posted
Posted

wider rear tyre gives bigger contact patch = more grip at the rear... your car is RWD, so u need more grip at the rear when launching... If anything, I would have thought that a wider tyre would put more stress on components since there is a greater resistance to movement, so the shock goes through those parts that can move. eg... bigger rear tyre puts more stress through gearbox cos instead of just spinning, the tyre sticks and causes resistance against gearbox/diff...

as for the fronts... i cant see how turning with less resistence is going to stuff anything up in the long run... maybe if you had super wide tyres on the front there'd be more stress because instead of the tyres just scrubbing along (understeer) they are gripping and the suspension is left to disapate more of the energy... i dunno...

sounds like a retard to me.

inissane Proficient

inissane

Posted
Posted

there are bits of truths here and there but generally bs - just get some 245s on the back and u will be fine they will fit on sweet. The quality of the tyre you put on depends on ur driving habits etc and say what tyres you got on the front? std suspension? large wheels/tyres been put on skylines since blot, hes probably old school

you get what you pay for usually in terms of grip, a quality michelin tyre of 225 diameter would kill a 255 falken but you may wear it quicker and it not be worthwhile - depends

monkeykplunk Mentor

monkeykplunk

Posted
  • Author
Posted

yeah i figured it was mostly bs

I mean, the logical way of looking at it is that a wider tyre will give you a bigger area of rubber on the road and therefore improve the way in which the car contacts the road.

I spose the crucial thing is that you get a decent tread pattern with regard to water displacement when the tyre is that large, because some may be ineffective in channelling the water away from the centre of a wider tyre.

At the moment I'm running Kumho Supra 712's, and they're pretty good at that, but in my travels shopping around I've seen patterns that just wouldn't work on a wide tyre.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AdiR34
      Did tie rods. Steering now not "springing" back.

      By AdiR34 · Posted

      Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Keeper
      S A U N S W Club Membership

      By Keeper · Posted

      Got you mate. Check your email!
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I see you've never had to push start your own car... You could save some weight right now...
    • niZmO_Man
      For Sale 2003 Nissan Skyline V35 GT350 Premium

      By niZmO_Man · Posted

      You need to put location and price
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
×
×
  • Create New...