Jump to content
SAU Community

Recommended Posts

G'day Mik, so what sort of engine did or do you have these GTRS bolted to? Im looking at just a stock motor with tomei cams bigger injectors...PFC etc...

and what revs are you getting 1 bar boost at?

Stock motor with Tomei drop in cams. On the dyno, 1 bar comes up at about 4650, but target boost comes up VERY fast from there.

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

ahh ok pete! I didnt know you had R34 N1's I thought they were the garrett equivilent of the HKS 2530?

anyhow Im still searching for a set of N1s or 2530s..... hmmm

I thought these were one in the same BUT i will know for sure when they come off and i will let you know as i am rapped with there around performance and believe these to be one of the best turbos for a street gtr.

I thought these were one in the same BUT i will know for sure when they come off and i will let you know as i am rapped with there around performance and believe these to be one of the best turbos for a street gtr.

Peter, do your turbos run A/R 0.60 comp housings? I'm pretty sure that the turbos that everyone calls "R34 N1" turbos only run .42 housings

Peter, do your turbos run A/R 0.60 comp housings? I'm pretty sure that the turbos that everyone calls "R34 N1" turbos only run .42 housings

I know i have seen a thread on here with links to a site with all the nismo turbo specs on it but i just did a search and was unable to find it.

It showed the spec to the r32n1/r33n1 and the r34n1(ball bearing) and also had a couple nismo specials in there and the R34N1 was the largest a/r ratio turbo with a 0.60compressor and a 0.64 turbine (same as the 2530). Plus a young kid in buno took a shopping list from my car and bought all the same gear (r34n1) and these are 0.60/0.64 same as mine. I will keep trying to find the thread

:)

I'm currently getting my car tuned and I roughly want about the 300rwkw. It has the following:

Nismo R32 turbos - rated at 300ps each

RX7 Series IV Injectors - 550cc

RB20DET A/f meters

Standard fuel pump - (is going to restrict a lot of the power)

HKS Cam Gears

Will let you know how it goes.

Yet everyone raves about 2530s which have similar lag

In my experience, no, they don't. A few facts, we get 1 bar out of the 2530's at under 4,000 rpm on the RB26. The GTRS moving parts (compressor, shaft and turbine) weigh 25% more than the 2530 moving parts. So there is simply no way that they can be as responsive, given all else being equal.

This experience is not unique, the 2 fastest GTR's at Tsukuba again this year where both running 2530's. If the GTRS's where as responsive and made more power, I am sure the unlimited budgets would have funded them.

:D

I'm currently getting my car tuned and I roughly want about the 300rwkw. It has the following:

Nismo R32 turbos - rated at 300ps each

RX7 Series IV Injectors - 550cc

RB20DET A/f meters  

Standard fuel pump - (is going to restrict a lot of the power)

HKS Cam Gears

Will let you know how it goes.

I've got similar to you and will be looking for about the same power :P

I've got 2530's

Sard 700cc injectors

HKS intank pump

HKS cam gears

PFC + HC

Looking to get a set of RB20/25 AFM's and HKS style split dumps then I can start to assemble it all :D

Blitz...I don't think you can get the 2530KAI in T25 flange for RB26, can you?

There was a rumour that the kai kits were going to becoming available for the GTR, though admittedly I have only seen the KAI version of the 2530 available as a single item so far.

Might have a browse through the goodsmaster later.

I've got similar to you and will be looking for about the same power :P

I've got 2530's

Sard 700cc injectors

HKS intank pump

HKS cam gears

PFC + HC

Looking to get a set of RB20/25 AFM's and HKS style split dumps then I can start to assemble it all :D

I finally got my car tuned yesterday and got some fantastic results. The power I got is 297rwkw with standard fuel pump and a/f meters. I could not believe my eyes nor could my tuner. I did however put 550cc injectors on.

The power curve is just senstational; and the car pulls like a freight train. It is very progressive and goes all the way to 8000rpm.

I'm so pleased with the results that I will get used to the power first and then add a bigger fuel pump and a/f meters later.

I will post up pictures of the power curve very shortly.

I will post up pictures of the power curve very shortly.

Here is the dyno graph for Antz car. I took a pic of them yesterday. The dyno reads 10% and reads 360rwhp = 396rwhp taking into consideration10% loss. This works out to just under 300rwkW and Im sure if we were to run the car on a calibrated dyno that it would read 300rwkW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...