Jump to content
SAU Community

Recommended Posts

Just buy a proper dump pipe, get a split type if you really must, BATMBL has quite a few on offer here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=15558

costwise i don't really want to spend another 200 bucks plus for an extra piece of metal when I can use the gas axe, welder and a bit of pipe for about 50 bucks.

also i reckon that if i plum it close to the cat (as far away from the turbo, this will give better turbo efficiency because there is less turbulence. Thats the idea of the screamer isn't it?

what you guys reckon?

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1308991
Share on other sites

The concept of screamer is when the wastegate dumps the excess exhaust gases to atmosphere. This is why it is called a screamer pipe.

It is recommended to plump back as far away from the turbo as possibble. This will reduce turbulence. For legal reasons this must be before the Cat converter.

Hope this helps

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1309013
Share on other sites

run the screamer pipe through a 2inch cat or something mountedunder the car.

this way the exhaust is let off through a cat (not illegal)

then go to your local exhaust shop (EPA approved or whatever) and get a db test done.

when they rev it to 4xxx RPM, the wastegate wont open, making it legal noise at the required RPM.

its only loud under full noise.

Think about it. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1309942
Share on other sites

run the screamer pipe through a 2inch cat or something mountedunder the car.

this way the exhaust is let off through a cat (not illegal)

then go to your local exhaust shop (EPA approved or whatever) and get a db test done.

when they rev it to 4xxx RPM, the wastegate wont open, making it legal noise at the required RPM.

its only loud under full noise.

Think about it. :P

Hey this is a clever idea :cheers:

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr :wassup:

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310191
Share on other sites

Hey this is a clever idea  :cheers:  

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr  :wassup:

However, even though you pass the noise test you may not be legal still unless you adhere to the standards regarding how far back and where you are allowed to vent exhaust gases. In the ACT i am prett sure you are *only* allowed to vent exhaust gasses out behind the rear bumper and are not allowed to vent at an angle. Just something to think about.

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310298
Share on other sites

Hey this is a clever idea  :cheers:  

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr  :wassup:

not really, see thats extra piping, which in turn is extra weight.

when you could simply plumb it in just before your normals CAT

and you have no issues what so ever, and you save piping/weight and space

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310392
Share on other sites

However, even though you pass the noise test you may not be legal still unless you adhere to the standards regarding how far back and where you are allowed to vent exhaust gases.  In the ACT i am prett sure you are *only* allowed to vent exhaust gasses out behind the rear bumper and are not allowed to vent at an angle.  Just something to think about.

In Vic I belive it's something along the lines of:

Behind the last openable window and on the drivers side

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310410
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...