Jump to content
SAU Community

Recommended Posts

Whats the go with import prices atm? Espically GTRs, some of them are cheap as chips and still they seem to be forsale still!! Its crazy. You see R34 GTRs for a low 60grand, i remember just a few years ago they were like 80 grand+. What changed? Did the sudden influx in 15 y.o imports cause this? If so how come so many people ask 25 grand+ for a 15 y.o R32 gtr, yet I've seen R33 GTRs on this forum for as low as the low 30s, yet they still have troubles selling them. What changed in such a short time?

Link to comment
https://www.sau.com.au/forums/topic/71092-import-prices-whats-the-go/
Share on other sites

The reason for this -> more imports are coming in to Australia.

As a result, we have plenty of cars, and plenty of sellers. Because of the 15 year rule, we had something like 15-20000 cars come in last year, and that has REALLY affected the market.

A lot of the cheaper vehicles (in terms of the 33 GTR's) are crap, high km/thrashed examples.

You can import a 99 34 GTR for as little as $55k

yeah but still I kind of feel for some people who paid 60 odd grand for a r33 gtr just 3 years ago and now you would be hard pressed to get high 30s for it unless you'd modified it a fair bit.

My question now is seeing there are so many R32 gtrs on the market right now why do they still ask high 20s low 30s for them? After all most of them are a damn old car now and are showing their age it some ways.

so its the sudden influx in importing that caused this? Is it the 15 year rule? Cause when i imported my R33 just a few months back Compliance were ringing me up asking if my car was ready cause they getting quiet on work.

i think u'll find most people bought the car at the time and have had an awesome time in it since then, aren't really worried about this, times change and so do car prices.......

and i dunno about everyone else but i buy a car with the intent of keeping it for ages, not as a 2-3 yr phase

something like that, since hte rule was introduced.

 

Figures could be off by a few thousand each way, but you get my point.

 

SEVS cars are quite low volume imports

What, since 15yo rule was introduced? Wasnt it YEARS and YEARS ago? So 20 000cars isnt that many over that space of time. But if it was just last year, yeah, thats a heapo cars.

ecause of the 15 year rule, we had something like 15-20000 cars come in last year, and that has REALLY affected the market

:bs!: there are not that many new 15 year cars on our roads, come on.. If there was that number they would be everywhere.

I'll be lucky to see any R32 in one given day, never mind a cefiro or any of the others.. it's possible there are a large number commercial vehicles, 4WD or something like that getting around I wouldn't have noticed - but not your general "sports type" import.

and i dunno about everyone else but i buy a car with the intent of keeping it for ages, not as a 2-3 yr phase

You'd probably be the rarity.. I'd say about 90% sell their import within the first 12-18 months of ownership. Some are lucky to see out even 6 months. There are not many "long term" import owners out there, who have owned the same car for more than about 2 years.

predator - I agree with your points about people keeping their imports.

The shortest I kept mine for wouldve been about 3 months. The longest about a year.

You are wrong about not seeing R32's etc around. Keep in mind there are a shitload that are still for sale, many are still at the docks here and in japan. You not only have 89 model skylines, but also 180sx, silvias, and other stuff like older pajero's. vans, porsches, etc. And other stuff that has come in from the states and europe etc, would also be classified under the 15 year rule.

So ultimately, yes, there are a shitload of older cars on our roads now. 15-20000 cars isnt really that much considering there probably would be around 10 million registered cars on our roads ?

I think the prices people are asking for R32 GTR's is a little excessive, 30K+ for a 89 model (with some mods) while you can pick up 92-94 for high 20's. People can no longer expect to get that kinda of money due to rise in supply which is slowly meeting demand.

15 year rule has brought down prices which is a good thing if you are buying but if bad if you selling...

If the 15 year rule was to remain "open" for another 2years we could all get Series 6 RX-7's for 20k and less!!! It would be just like the R32 GTR's massive influx, prices go down and heaps of kick ass rotors going around.

Without the 15 year rule most of us would still be driving (or thinking) VL-T or cordia's and imagine the prices of WRX's or even GSR lancers (GSR's still overpriced in my book).

Shame that the rule will change but at least their will be heaps of parts available, tuning packages and know how out there

My 2 cents

Tommyk

Where can i pick up a R34 GTR for 55k?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...