Jump to content
SAU Community

Recommended Posts

that sounds about right.

i wont put FM901's on the back of mine or any other expensive tyre because my car is too tail happy and they wont last long at all.

I will be putting FM901's or something similar on the front, and something like cheap Falkens on the back.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

kebab, what's the point of good conrol on the front if you haven't got traction in the back? you need the good rubber on the back to stick to the ground and the 901's are a very soft compound which means they stick well but they also wear well too.

i say buy good tyres all round and just rotate;)

Originally posted by ONARUN

kebab, what's the point of good conrol on the front if you haven't got traction in the back? you need the good rubber on the back to stick to the ground and the 901's are a very soft compound which means they stick well but they also wear well too.

i say buy good tyres all round and just rotate;)

If you can't afford good rubber all around i would rather get really good on the front and average on the ass then average all around.

What would you like a car the understears or overstear most of the time overstear is alot easier to control and looks heaps !! better.

Bob Jane gave me a quote of $1500 all around today.

but they had no idea what they were talking about so i will get a few other quotes too (from tempe tyres!!)

$300 for 235/40/18 Falkens

$470 for 265/35/18 Falkens

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...