Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have asked this question within other threads but have not got any replies, so I thought I would open it up to the wider community to see what response I get.

Does the R33 GTS-t have any camber adjustment from the factory? I have lowered the car and now have about 2degs of negative camber, causing the insides of my expensive tyres to wear faster, no good for my wallet.

The other question I have is whether when drag racing anyone bothers to have the camber wound back to neutral, to keep more rubber on the road, or am I worrying too much?

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7176-camber-adjustment-on-r33/
Share on other sites

Duncan,

Yeah I've just had it done, there is very little in the way of camber adjustment, probably only 3/4 of a degree, so I may need a camber kit for the back if it's possible.

And yes you were right it was the toe in that was causing the wear on the rear tyres. Hopefully now I will get better traction for the drags, and reduce tyre wear. Hey wait.. aren't those two things mutually exclusive.

Thanks Duncan

See'ya:burnout:

dude,

You need adjustable top control arms (for d' camber) front, they go for around $500. Rear camber kit (bunch of different bushes and sleaves) bout $100.

While your at it you could do the adjustable radius rods for a bit of extra camber, for turn in and less nose dive under brakes.

Rev210,

Thanks for that, I knew somebody had to know about it. I take it I can get this sort of stuff through Whiteline? I was only thinking about doing the back, but if I want to race it then I probably should do it all?

Thanks for the help.

See'ya :burnout:

Originally posted by GTS-t VSPEC

Rev210,

Thanks for that, I knew somebody had to know about it. I take it I can get this sort of stuff through Whiteline? I was only thinking about doing the back, but if I want to race it then I probably should do it all?

Thanks for the help.

See'ya :burnout:

They would be a good start.

If you can't get everthing from them let me know. I'm sure I'll remember who it was that does the different bits:cool:

Thanks, I think after this Wednesday I'll start off with the pineapples everyone is raving about and then start to improve the overall handling. In general I want the car for hard cornering and race tracks, but I'd like the occasionaly drag race. Is it possible to have both of these setups?

See'ya

:burnout:

Talking of suspension set-ups here's my compromise btw straight-line drag grip, all round driving & cost!

Rear camber - less than -0.5 using a Whiteline camber kit + the factory adjustment. From the factory you get -/+0.75 of adjustment. The Whiteline c/kits allow an additional -/+1.5 (via 2 kits) I only needed 1.

Front camber - -1.2

Whiteline rear subframe align/lock kit

Whiteline blade adjustable sway bars front & rear

Kings "low" springs (30mm lower than stock)

Standard shocks - I'd like to upgrade these but it's not on the list of priorities, in fact the shocks aren't too bad! Even the suspension workshop that I had do one of my alignments commented that my standard suspension components all appeared to be in good condition! Maybe those low kms are legit'!? Doubt it :D The standard shocks "should" also help with weight transfer upon launching.

All of the above changes have had some positive effect on my cars handling, mostly straight line grip!

BUT........ Without a doubt the biggest improvement to rear grip levels was fitting top quality tyres!

GTS-t VSPEC - In answer to your last question (in your first post) I don't so much as dial out the neg' camber but set my rear camber fairly neutral all the time. This way both rear grip & tyre life is maximised :P

Race track suspension? I haven’t got a clue in that dept’ ;)

Hicks,

She's more likely to vomit into your lap, and you having a 10sec car, I'd like to see that!

whatsisname,

Thanks for all the info. I currently have coilovers, which dropped my ride height, and at maximum factory adjustment the camber is still -1.3deg on the back, I'd prefer it to be neutral. I'll take what you said onboard, and hopefully when I have some more money I can start to get serious with the suspension and handling.

See'ya

:burnout:

GTS-t VSPEC,

-1.3 rear camber is about the same I had prior to the Whiteline kit (after lowering 30mm).

Lowering more than ~30mm without a camber kit ='s uneven tyre wear.

The Whiteline camber kits are cheap so it's easy fixed :(

Looking @ the level of engine modifications your car has/will have I'd be aiming for minimal r/camber! Unless you want plenty of :burnout: :D

Matt

whatsisname,

I think we dropped the height by 25mm or so, and are on the limit of the factory camber adjustment. The camber kit sounds the go, I just wanted the neutral camber to get more grip for drag racing.

I definately don't want :burnout: as I have expensive tyres normally.

See'ya:burnout:

Whatisname.

G'day Matt, how's things??

Hay can you do me a big favour and measure the distance between the middle of your wheel (front and rear) and the lip of the top of the guard.

I'm changing the suspension set up on mine soonish and need to know what the factory height is. I know that yours is 30mm lower than factory it'll give me a good idea.

Thanks

Jayson

G'day J,

Things are good mate :)

Yeah no prob's dude. I'll take some measurements & let you know shortly.

:D

Edit: I've had a quick look. Here's what I got.....

Front - ~340mm

Rear - ~332mm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...