Jump to content
SAU Community

Recommended Posts

Evening,

Slightly off topic, though I’m looking to get EBC soon, and dun wanna pop my zhuast wheels into the cat. Does anyone know any good places to get em rebuilt with steel wheels? Maybe even a front wheel change? A place here in Cbr quoted me 2000 just for the wheel change!?! Surely not.

Any help would be appreciated

PS - What boost do ppl run with the ceramic wheels? I was thinking 10 would be safe?

- M

Dyna Torque here in sydney can do just about anything for you. A complete rebuild, steel wheels, 360degreee bearing etc should be about $2000 roughly.

Most ppl on here reckon 14psi max with stock ceramic turbo's.

http://www.dynatorque-turbo.com/

Cheers!

Though I was thinking it'd be closer to the 1G mark for just the steel wheel, and balance; could I get away with just that? Its done 87K Km's.

I heard 14-15 pounds is the limit'ish, though has anyone here run that amount for a long time / constantly?

Thanks all

Mine let go on 12psi boost... depends on how "fatigued" the bonding material is I guess...

In Canberra the only place I would trust for a rebuild would be Cooma Diesel out in Fyshwick. When mine let go, they wanted roughly $2000 for a rebuild as mentioned above ($960 per turbo I think it was). Decided to spend some extra cash and get HKS GT2530's, never looked back since :)

Mine let go on 12psi boost... depends on how "fatigued" the bonding material is I guess...

In Canberra the only place I would trust for a rebuild would be Cooma Diesel out in Fyshwick. When mine let go, they wanted roughly $2000 for a rebuild as mentioned above ($960 per turbo I think it was). Decided to spend some extra cash and get HKS GT2530's, never looked back since :)

12 pounds? Shiiite. Mmm, yeah that’s the conclusion Iv come to, save for 2530's. Where did you pick yours up from? As the cheapest iv seen is 4G +!

Which 2530's fit the stock manifolds?

Thanks man

12 pounds? Shiiite. Mmm, yeah that’s the conclusion Iv come to, save for 2530's. Where did you pick yours up from? As the cheapest iv seen is 4G +!

Which 2530's fit the stock manifolds?

Thanks man

I agree, go a set of GT 2530's. I was looking at getting my stockers steel wheeled from GCG, but it was only a couple of hundred difference to get the 2530's.

You can buy the GT2530's for GTR almost anywhere, just make sure you get the kit for the GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...