Jump to content
SAU Community

Recommended Posts

Skylines Australia NSW Club first official drag day is coming.

Date : Sunday 31 July. It's closer than you think!

Cost : $220 for non members ($110 now, $110 later.)

Click here for the members thread.

No experience necessary. Just come along and have a go.

Ok then. It's time to get depositing.

The Skylines Australia bank account details are as follows:

Bank - NAB

Branch - Marrickville

Account name - Skylines Australia NSW

BSB - 082 356

Account number - 546 393 766

First deposit is $110 although you can deposit $220 if you like.

Please put your full name in the description. If you are depositing at a branch (how quaint ;)) then make sure you put your name on the deposit form (I know there is a spot for it on there somewhere) and ask the teller to enter it so he/she doesn't forget.

When you have done all this email me at - sarpi at punkass dot com - with your internet banking receipt or date and branch of deposit.

Please include in the email:

Full name -

User name on the forums -

Mobile Number -

Amount paid -

Copy and paste the above to make it easier for me.

Important - You will not be confirmed until a deposit has been made.

Thank you.

So who's keen? What do you all think? Any questions?

  • Replies 214
  • Created
  • Last Reply

Top Posters In This Topic

The day before all of the spots have been taken. We are doing this with the RENEW club and there is a 50 place limit. Basically, it's not like we are going to fill up in a week but I don't think we'll have trouble filling the day.

How much time do you need?

Also, I should mention that I want everyone who is keen to post up what their best time for the day will be to the nearest 100th of a second (eg 10.34). Whoever gets the closest wins a prize. (not telling what is yet cos I haven't decided.)

Unfortunately we can't keep track of the numbers, ourselves and RENEW are both taking spots so we don't know how many are left.

I suggest booking early to make sure you don't miss out

Its a great day for people new to drag as well since you get heaps of runs to practice, not like a street meet where you wait 6 hours for 4 runs

Yes its at WSID, and we have the track all day 9-5. I understand we will also be putting on a BBQ. The clubs are doing a private hire so we can organise it as we like.

One bloke last time did close to 50 passes in 8 hours!

Does someone going want to mark me down as a pitbitch for them? Happy to wear a pushup bra for the day :cheers:

If I knew my car was going to be 100% i'd put my name down to compete but im unsure at this stage.

I guess whatever you can normally take to a street meet.

Pm me if you have any specific vehicle you want included and I'll give you a 100% answer Doughie.

Silver - should be right but it's a bit like asking how long til you get your next root. I don't know exactly but it will probably happen one day.




  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...