Jump to content
SAU Community

Recommended Posts

hi guys,

quite some time i haven't wrote in this forum..very busy nowadays,

i ve just installed a lsd gearbox on my cefiro.I think i have a problem here and need some of you guys advice.

when i'm driving slow and try to make a turn ( left r right ) there is a loud sound from the rear axle .sounds like some gear knocking each other..i don't know how to describe it .but it sounds real loud even I can feel the vibration.

Driving at high speed,the sounds gone even while taking a sharp turn.My mech told me its normal for a car with a lsd gearbox attached to it to have that kind of sounds.It is true ...that sounds really piss me off....any idea?

Link to comment
https://www.sau.com.au/forums/topic/72819-cefiro-with-lsd-gearbox/
Share on other sites

mine is a viscous lsd...taking corner really make me sick hearing the clunking noise...seem very abnormal to me.I use my car for normal street driving ...innyour opinion is it suitable using viscous-lsd or should i put back my stock diff.Any possibilities will damage the the parts or not?

but on the straight line it really made a difference....lots of power ..

mine is a viscous lsd...taking corner really make me sick hearing the clunking noise...seem very abnormal to me.I use my car for normal street driving ...innyour opinion is it suitable using viscous-lsd or should i put back my stock diff.Any possibilities will damage the the parts or not?

but on the straight line it really made a difference....lots of power ..

standard LSD Viscous will not CLUNK. as its a 1way type LSD.

Welding your LSD ( from the sounds of it ) will make it CLUNK. I bet all your axle's have come loose, tighten them or else ( most likely already) you will have oil spill's from the axle/LSD seals.

just get a standard Viscous LSD (factory) and the clunking will go away !!

I think you can tell a viscous if you have the car up and turn one wheel it will turn the other wheel opposite.

If it's a mechanical I think if you hold one and turn the other it will not turn unless the one your holding turns.. this applies to 1, 1.5 and 2 way.

*i think*

Do a burnout or a donut in both directions, youll find out if its an LSD obviously from the two tyre marks it leaves.

The nissan r200's are viscous, and yes when you turn one wheel the other turns the other direction. Viscous doesnt engage until your loosing traction with one wheel first, which is why they arent very predictable compared to a mechanical LSD.

Sounds like your LSD has been shimmed. Which is an very cheap and easy way of getting a SAFE locker or preloaded viscous lsd. If your mechanic shimmed it, and put the wrong sized shim.. which are in 0.0xxx of mm's! it will adversly effect your lsd preload... which is the skipping your hearing on coners.

...or u have a bung diff! lol

ask him where he got the diff from. As its most likely 2nd hand of from any other nissan.. as all rwd nissans turbos (s13,14,r32,33,z32,cef,laurel etc) use an r200 lsd.

i got a locker diff...dont know how they locked it (was done in japan) it's making the same nasty noises, anyone know what i should get for about $500, it's gonna be my daily, so want some kind of lsd for when the right foot gets an epilleptic fit, but dont want the crunching and clunking...chicks arent impressed by a car that sounds like the rear end is about to fall off :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...