Jump to content
SAU Community

Recommended Posts

Read my last post guys.......

Hey guys,

well now that my car is sold, I already have a GTR on its way from Japan.

It is a 1994 R32 GTR in silver.

It has a few basic mods like 17 inch wheels, exhaust, filters, suspension etc.

I was told it has an overhauled engine. Im not too sure what has been overhauled yet. Have to find out later.

I have a few questions.

1: besides a general service, what should I do to it before I even drive it? Like fuel filter, clean injectors, compression test????

2: From experience what will I need for 250rwkw (500hp engine) I have a fair idea on what I need but just want to see what everyone else has to get this sort of power.

3: will I be able to beat a stock 5 litre V8? :P

4: any tips on what sort of oils to use? I was thinking Mobil 1 for engine, and Castrol VMX 80 for gearbox.

5: what are a good set of tyres for it?

Nothing too big or special, maybe around $1000 - $1200 all up.

Thanks in advance guys.

Ill have some good pictures to post in a few weeks, but dont have any good ones as yet.

I look forward to going on a cruise with everyone too.

Andrew

Link to comment
https://www.sau.com.au/forums/topic/7320-new-gtr-on-the-way-a-few-questions/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

3. YES

4. i use Motul4100 semi synthetic... used to use motul6100 full synthetic, but can't justify the price difference...

5. i have bridgestone grid2 in 245/45/17... they came with the car in brand new form... that was april 2002, it lasted me since then and i went to 2track days with it... still got a fair bit of treads left... they offer enough grip for me..

:P

...look foward to the pix mate! Sounds good, hope it all works out well for ya and you get a good deal. And with a twin turbo, the sky is the limit in terms of power there.

Cruise would be good if you're ever down in melbourne. Then you can take your new beast, and i can sit behind you in your old beast R33 :-) with other SAU skylines in tow.

Down along the beach rd is good like down from st kilda to frankston or so, but too many cops these days..you have to sit bang on the speed limit every second of the way which is no fun.

Gordon: yeah mate, I cant wait for more pics too!!! hehehe. As soon as I get them, ill post them up.

Man id love to come for a big cruise. Ive only ever been on one in Adelaide, and that was awesome. Not only was the run great, but just hanging with fellow skyline enthusiasts really gets the blood going.

Clint32: yeah thats what I though (and was hoping) Looks like I wont have to spend much on getting this kind of power then.

Shell: yeah I asked for silver, then black, then white. But I REALLY wanted silver, as I love the 32's in that color.

Kamikaze: yeah mate, and when I get it, ill hafta go for a road trip and take you for a spin. Hopefully you do go straight for the GTR man, that would be unreal as a first car. (just watch the insurance though)

kabab: how much is it for a set of those? and where can I find some more info/pics of them? I will be after something that has some grip, but not heaps (i wanna smoke up all four tyres, as you do in a GTR) But I have also heard good reports on these tyres.

ps, does anyone know how I can change my name on here to Ethan_R32???? becoz I dont own an R33 anymore.

good to hear dude glad you finnally sold your car it was sweet as well.

gtr should be great

IF you can invest in a power fc from the start with some tuning a probalby a a bigger fuel pump and may be bigger afms you could get to 250 rwkw is very doable need to run a bit of boost on the turbo's though to get it.

any way enjoy just drive the car for now.

should be good for mid 12's and possibly much less.

meggala

Man.... I'm not being biased here or anything but

SILVER R32 GTR'S ARE THE SEXIEST B*TCHES ON THE ROAD!!!!

:P

Just service the car before you start gunning it.

Out of the box, you'll munch V8's for breakfast. Look for 911's. More exciting challange.

I'm using Shell Ultra at the moment, but use to use Mobil 1. Mobil 1 better cause it keeps temps down. Ultra seems to sit too high on guage for my liking.

Get PowerFC first. This was my mistake. I got FMIC and other things first whe I should've got the PowerFC first. Have to adjust braking points and how hard I stomp on throttle cause of this one change.

Yeah I was thinking about a power fc. But I have plans for bigger turbos and was thinking that maybe I will need it tuned again, so more money.

Silver: yeah I really reckon the silver R32's looke SOOO nice. The R33's dont look as good in silver for some reason.

I was joking about a stock 5 litre V8 :P

I can already beat LS1's in my GTS-T.

For the owners of a GTR, whats it like lauching from a stand still at high RPM? Ive never experienced that, and want to know what it is like.

ethan if your going bigger turob youwill definatly need power fc if you want to see a gtr lauch at high revs go to my site in side the front page is a link to a vid of my runs at calder the gtr next to me had a very big rubo and was lauching at wll over 7000 rpm

meggala

Needs a little correction on the R32's. Not much. Rear wheel spins then front kicks in so don't back off.

Meggs is right. Either PowerFC first or both at the same time. Changing turbo and running with standard ECU doesn't sound right.

Unreal. I cant wait to launch it.

Can you actually get all four wheels spinning with around 250rwkw if you dump it at around 6 or 7 grand?

And how are they through corners? I already know that my GTS-T handled like you wouldnt believe around a corner, but too much throttle and it comes close to spinning out. Can you give a GTR a fair bit of throttle around a bend?

Also, back to question 1, can anyone give me a bit more info on this? Should I do a compression test to make sure it is healthy?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...