Jump to content
SAU Community

Recommended Posts

i have just changed to splitfire coils, and it is still recommended to keep the plug gap to 0.7 or 0.8mm. On the street it ran fine at larger gaps (i tried up to 1mm) but on the dyno it missed badly up top of the rev range.

as a point of interest, with plug gaps at 0.7mm, i gained roughly 3rwkw on the same dyno in the same conditions since changing the coils to splitfire, nothing else changed. Its probably insignificant, as i didnt do numerous runs and take an average, but its nice to see :(

oh, to answer your question, i would recommend it. Im only running 17psi, and the stock coils would give me a few misses every now and then, but with the new ones i havent seen a miss yet. It did also feel like it ran stronger after i changed the coils. May be Placebo effect tho!

Also if yours is an early series 1 33, the coils will be getting pretty old now.

Yeah, mine missed like crazy once I got past 15 psi, but I found all the coils were cracked.

Splitfires are a good upgrade, and I saw an improvment of around 5 - 8 kws or so, and the power feels a lot more solid (and I can actually floor it now....)

you can get them for ~$700 thru greenline or nengun or the like. Or if you want them ASAP Horsepower in a box should have them on the shelf and get to you in a couple days, but for around $900 maybe a bit more -not sure, check the website. High octane racing in NSW should have them also.

pretty sure price is same for series 1 or 2.

as far as i know, the splitfire series 1 and 2 coils are exactly the same coils, just the plug is slightly different, so its possible you could just use the correct loom/plugs with either coils on s1 or s2. correct me if im wrong.

guys,

is it worthwhile to upgrade ignition coils to spitfire when running about 18psi or r33 gtst? any feed back would be appreciated!

not really.

My car is fine and im over the 300rwkw for the time being.

I have no issues at all.

MY suggestion, put it all together and then see if you have any problems.

THEN spend the extra $$$ on getting them. That way your not spending money if you dont neccasairly have to

And some food for thought...

Whether the splitfires are actually better... who knows.

Remember your replacing 10year old packs with brand new ones, so of course they are going to work better

Thanks mate, i will run with the stock coils first then, if they work, i dont have to get the spitfire! :P

not really.

My car is fine and im over the 300rwkw for the time being.

I have no issues at all.

MY suggestion, put it all together and then see if you have any problems.

THEN spend the extra $$$ on getting them. That way your not spending money if you dont neccasairly have to

And some food for thought...

Whether the splitfires are actually better... who knows.

Remember your replacing 10year old packs with brand new ones, so of course they are going to work better

:)

im of the belief that if money can be better spent elsewhere, then it should be... if not save that money incase something else breaks.

I dont mind talking from what ive found out of my own car which ive spent a lot of time/money on... some i wasted. And i'd hate to see others do the same

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...