Jump to content
SAU Community

Recommended Posts

Hello peoples i need to do a bottom end rebuild on my motor broken piston and i am just after some advice, tride a search but didnt help much. This is what i am thinking about at the monement.

Block cleaned and honed.

Crank balanced.

RB26 rods.

Nissan mains.

Nissmo big ends.

Piston? ( i need help with).

Match the rods to the big ends and crank with the right clearences(anybody know of these clearences)

R33GTR oil pump with a jun adaptor(dose this sound right)

R33GTR water pump( do i need any adaptors with this)

And maby a metal head gasket(what are the standard ones good for)

This is a long term project, the rest of the car is fairly standard but i would like in the future to have a lot more power, so i need to do just the bottom end for now to get the car back on the road any advice would be good. :Oops:

Link to comment
https://www.sau.com.au/forums/topic/73491-rb25-rebuild/
Share on other sites

I highly doubt a search gave nothing.

This have been covered with a hell of a lot of detail

basically, mine

Arias 87mm pistons

Prepped GTR rods

N1 oil/water pumps

Usual bottom end balancing and prepping  

and thats it.

Had a topic on my rebuild to couple of weeks back

Mahle psiton

Mahle bearings

shot peened rb25rods

n the usual

plus bitta head work

Link to comment
https://www.sau.com.au/forums/topic/73491-rb25-rebuild/#findComment-1352137
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...