Jump to content
SAU Community

Recommended Posts

  • 5 months later...
Hi all

Recently have a problem with the car

When the car is idle, it would sometimes shudder/shake for about 1/2 second

This can occur randomly at idle and makes no sounds

Any suggestions at what it could be ?

Thanks

Eric

Got the same problem with my 34 GTT. It only seem to show when car is warmed up. When the oil temperture pass 90 degree and sitting idle the random shake and you can hear spluttering sound from the exhaust.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1649392
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- afm

- spark plugs

- all coils

- ignitor

- fuel filter

- tried fiddling with wires to see if its an electrical problem - no luck

- had injectors cleaned about a year and a half ago

also tried cleaning IAC, fiddling with throttle switch, and cleaning the intake manifold with some carby cleaner all with no luck

if you find what it is, then i will have sex with a monkey

Waz.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1653257
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- spark plugs

- all coils

Waz.

hmm. bugger. so changing the coil didn't fix the problem. I was seriously thinking of picking up a 6 pack splitfire coil n replace them all and hoping for problem solved. But I guess I will have to look else where.

Anyone else got the same problem and had it sort it out?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1662449
Share on other sites

Mine has started doing it in the last week or two... Just a quick shudder and a gurgle from the stock exhaust system. Only when warm.

Interesting! I thought I was due for new spark plugs, cause it sounds like an occasional miss.

Do 34's have the ignitor in the ECU or engine bay?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1666968
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1669617
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

I have an R33 S1 and it's also affecting me. It only used to happen a poofteenth before I got my atmo BOV and now it does it pretty hardcore. Unless I leave it for 4 hours between drives. If I warm up the car for 5 mins in the morning I'm fine. It's when I stop and start the car (like doing grocery shopping or something) that it happens most

has anyone used the the eletronic idle stabiliser?

Clicky

Does it work?

Someone mentioned that another result of shutter is also loss fuel economy... Will this also fix that ? I

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670156
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670302
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Well my fuel gauge doesn't work so I can't be sure. (Gotta fix that). I fill up every 200KM anyway coz I believe cars in general run more efficiently on a full tank. By my rough calculations...since the BOV intall by I can only get about 400KM rather than 450KM to a tank. It is a 65L tank isn't it?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670436
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...