Jump to content
SAU Community

Looking for Brake Specialist Shop

3R1K

By 3R1K,
in Western Australia

 Share

Recommended Posts

Boostzor Grand Master

Boostzor

Posted
Posted

Found bendix fade a bit too much, yes the ultimates or premiums or whatever they call em now.

Really liked "Green Stuff" by EBC and hear that u cant go past race brakes RB26's which are well priced too. I think both of those pads are semi organic.

Steve Grand Master

Steve

Posted
Posted

My personal favourite is Endless SS-S, low dust, great initial bite, progressive and rated to 500deg C, so not likely to fade on the street. Oh, and they wont chew the ass out of your rotors either. I have also found project Mu are pretty good, not quite the same intial bite as endless, but otherwise on a par. I have also tried bendix and greenstuff, didnt think alot of them (personally), better than stock though, but dusty and seemed to wear rotors like there is no tomorrow.

your brakes will perform ALOT better with good pads than if you upgrade and use normal pads, (I went from stock SR20 brakes with project Mu pads to stock R32 brakes, and the SR20/project Mu combo pissed on the stock R32 setup) Once I fitted endless pads it was a different story though. Good brake pads are an excellent upgrade.

I would recommend getting the best you can afford, what price your life? cheap insurance and alot more fun driving the car.

Abo Bob Grand Master

Abo Bob

Posted
Posted

I don't think it's your Ultimates that fade. I've never experienced fade in my Skyline and that's all I've used so far. I've been to about 10 track days and as everyone around my area and on this site can attest, I drive my car hard.

Steve Grand Master

Steve

Posted
Posted

there are more factors to whether or not a brake pad will fade than just the pads, tyres, driving style, how tight the track is etc.

Your pads are obviously ok for how you use them, but not in Boostzor's case. I have know other people that have had fade on ultimates (so they told me), even though I didnt get it.

Alot of variables.

Boostzor Grand Master

Boostzor

Posted
Posted

Yeh if the rotors are bigder they are going to dissapate more heat, so if they are thin they fade faster. When i had them they were on a jza70 and the rotors were about half way done. After 3 hard brakes u could feel it fading.

As steve said though, EBC ab RB chew rotors good. Too bad the endless are so expensive.

sexzila Veteran

sexzila

Posted
Posted

I would recomend do it youself or get one of your friends to do it Erik.

Just got back from the place in Bayswater (no name)......whata bunch of cowboys.....

They frucked one of my wheel nuts and their reasoning was " who did your wheels before" and that is after they takend them off , put them back on, and took the car to do the alignment....

.....and then they had decency to tell me its ware and tare..........dick****fiths.........:cheers:

All that: for them to tellme there is nothing wrong with my car.......

Well I get to the breakes now. I ask them why is one of my brake pads bent inside after I replaced them ....... and the guy tells me we are specialists but I don't know!!!

Whata???

So after spending so much money on different barke specialists that know fruck all...

Wheel alignment specialists......same......fruck all.....

So much for pro help.....

I have decided from now on, even with not much time these days I am doing it myself.....

Read the forums guys, ask for the manual if you need one, I have one, so does Paul and few more other people. DIY!!!

Steve Grand Master

Steve

Posted
Posted

Boostzor, endless may be a bit pricey, but stack up well against others when you consider the money you save in not having to replace your rotors so often - more rotor = better brakes :rofl:

Abo Bob, bigger rotors can make a difference, both in thickness and diameter, as can the design. Take for example the 'roo paw' (or whatever its bloody called) design of DBA rotors - they spent alot of time and effort trying to improve the cooling efficiency of the rotor. Then you have the material that the rotor is made of which also makes a difference.

If you have aftermarket/upgraded rotors, there could definately be a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      That is surely the biggest gathering of Stageas in North America, ever!
    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Remember kids - if you can't afford to buy 2 GTRs......
    • Butters
      R32 gtr transmission strength, billet plate

      By Butters · Posted

      I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • r32-25t
      R32 gtr transmission strength, billet plate

      By r32-25t · Posted

      Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Matt Z
      SAU NSW - R U OK? Southern Highlands Cruise

      By Matt Z · Posted

      Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...