Jump to content
SAU Community

Recommended Posts

I've put up a thread on nissansilvia.com, basically i just want to see how far we can get and i dont want to give up until there is offical word from government bodies saying why this can never happen...

I'm sure if there is enough people behind this, they will have no choice but to listen and answer our questions. So lets try and get heaps of interest, and then we'll see where we can go from there!

http://www.nissansilvia.com/forums/index.p...showtopic=92772

Thanks

Link to comment
https://www.sau.com.au/forums/topic/74258-drift-track-proposals-for-melbourne/
Share on other sites

http://www.commercialrealestate.com.au

find a large enough commercial area, then you need to find sponsors (like tyre distributors who thrive on people burning rubber) to invest in a property, then build a track the size of a football field with soundproof walls and viewing galleries, and you're done.

Eibisu driftland's not that big a place, and if all you want to do is set up a "driftland" it dosen't have to be very large scale. Commercial areas of this size are easy to get in the heart of the city in a centralised area (your only issue would be the local council and its constituents authorising the property for motorsport use due to noise/pollution etc), then all you have to do is make sure you clear the sound and traffic regulations of the area and you're good to go. Lease parts of the property to shops such as bodykit fitters, workshops and wheel/tyre shops as well as fast food joints, so that whoever comes there has a complete solution to fitting tyres, repairing broken axles etc and visitors can get food/refreshments/merchandise etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...