Jump to content
SAU Community

Recommended Posts

Hey, just wondering if anyone has had their car re-trimmed lately.

I'm looking at getting mine (when it finally arrives) retrimmed probably in black or dark grey leather with colored stitching/piping. Its an R32 GTR so front GTR seats, back seat and door trims.

I'd be keen to hear from anyone who has had a retrim done (or an upholsterer even), and get some idea on cost.

So anyone who has had any interior work done(any car, and not just leather) please post here with whatever details you want to leave.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/
Share on other sites

Yeah dude, hopefully. I'll def do the photos too. I have no idea at all either, and my car hasnt even arrived yet so I cant even take it to a retrimmer for a quote, thats why I hoped someone here might be in the know.

I've heard from different people, "Should be around a grand." "My mates mate got his silvia done for 1500, but that was cash man." "You wont get it done for under 2500 cash." I have no idea really, I think maybe between the last two somewhere?

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1370453
Share on other sites

I was hoping to get some idea from the forum members, but I might go and ask around a bit. Only thing is my car isnt here yet and I don't know how seriously the retrimmers will take me if I start asking questions about a car that for all they know I'm just dreaming about.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1372736
Share on other sites

I think I will look at getting my seats retrimmed if/when I get my R32 GTR also

seen an R32 with a cream/off white retrim (red with black bonnet) that looked nice

also one with a blue seat retrim, that looked not so nice :rolleyes:

EDIT: Duh!!, 2 posts ago, it was 2GU UP 2's car :)

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1373461
Share on other sites

I spoke to a trimmer on Monday and he said that its a pretty well a waste of time trying to retrim the GTR. Reckons the backseat is no probs, but the door panels and front seats are made in moulds or something and put together in some way that makes it impossible to re-do. I can't remember exactly what he said.

He said that every retrimmed skyline he had seen at shows etc didnt look right at all and they never last.

This guys was only a little shop in Kirrawee(South of Sydney), but he is only a few hundred metres from JustJap(where I had been moments earlier and who recommended him as they use him themselves), and he owns an R33 GTST which he had tried do for himself.

What do you guys think? Should I go for another opinion, because I can't really believe this?

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1386434
Share on other sites

I spoke to a trimmer on Monday and he said that its a pretty well a waste of time trying to retrim the GTR. Reckons the backseat is no probs, but the door panels and front seats are made in moulds or something and put together in some way that makes it impossible to re-do. I can't remember exactly what he said.

He said that every retrimmed skyline he had seen at shows etc didnt look right at all and they never last.

This guys was only a little shop in Kirrawee(South of Sydney), but he is only a few hundred metres from JustJap(where I had been moments earlier and who recommended him as they use him themselves), and he owns an R33 GTST which he had tried do for himself.

What do you guys think? Should I go for another opinion, because I can't really believe this?

Sounds like he doesn't want your business.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1386454
Share on other sites

  • 1 year later...

i know its a bit late:) but im a trimmer and yes u can retrim gts seats. you can retrim any seats. ive done plenty of them and they turn out spot on. They are a little more difficult because they are moulded on, that just means u can take em off to use them as patterns, same with most jap cars. all it means is you gotta make your own patterns. its just a bit more difficult and either this guy was shit or lazy.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2932625
Share on other sites

i know its a bit late:) but im a trimmer and yes u can retrim gts seats. you can retrim any seats. ive done plenty of them and they turn out spot on. They are a little more difficult because they are moulded on, that just means u can take em off to use them as patterns, same with most jap cars. all it means is you gotta make your own patterns. its just a bit more difficult and either this guy was shit or lazy.

I have leather recaros, what sort of $$ (ballpark) to do just:

- rear seat

- rear door cards (potentially the vinyl part with leather and suede in the inserts)

- front door cards (same)

- potentially and R32GTR vinyl dash retrimmed in leather...?

cheers mate

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2932980
Share on other sites

  • 2 weeks later...

hey there peeps just bringing this up again.

could anyone give a ruff price on getting my interiour done for my 32GTS-t. i going for black and red, not going for leather.

what i want done is the

rear seats done black with the red inserts

rear sides vinyl done in black with the red card

front doors vinyl in black also with the card in red

gear boot and hardbrake boot in red and vinly dash black

and maybe the roof and visors done in black too

thanks

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2961167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...