Jump to content
SAU Community

Recommended Posts

Here is a group buy for brand new Bosch 040 and 044 fuel pumps.

I can get the prices down for 5 or 10 peices of each pump.

Single price available also.

BOSCH 040

1x $245 delivered

5x $230 delivered

10x $210 delivered

BOSCH 044

1x $345 delivered

5x $325 delivered

10x $300 delivered

Finish date - Wednesday 8th June

Payment due - Friday 10th June

044.jpg

BOSCH 040 (P/N- 0580 254 040)

1/ Adam 33 - awaiting payment - Paid - sent

2/ Blackout - out

3/ traphead - awaiting payment - Paid - sent

4/ inissane - awaiting payment - Paid - sent

5/ Raistlin - awaiting payment - Paid - sent

6/ hanyou - awaiting payment - paid - sent

7/ Chef_32 - awaiting payment - Paid - sent

8/ Chef_32 - awaiting payment - Paid - sent

9/ Chef_32 - awaiting payment - Paid - sent

10/ Bunky_r31 - awaiting payment - Paid - sent

11/ Kristov - awaiting payment - Paid - sent

BOSCH 044 (P/N- 0580 254 044)

1/

2/

3/

4/

5/

6/

7/

8/

9/

10/

I cant do COD or Pick up as I need to get the money together to pay the supplier, have em sent to me and then sent to everyone by express.

For individual buyers - I will have them sent to you direct from the supplier if not available for immediate delivery.

:D

Link to comment
https://www.sau.com.au/forums/topic/74959-bosch-040-044-group-buy/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

how long does it take to have 1 sent out?

Depends if you are waiting for the group buy or wish to purchase individually.

I have 2x 040's and 1x 044 due to arrive mid next week.

Once here I can have them express posted as soon as money has cleared.

:rofl:

Is the 040 intank???

Its pretty easy to install, I have read the DIY for the 981 is this similar???

Yep, the 040 is an intank pump. The 044 can also be mounted intank.

040's are pretty easy to install and the DIY guide is a good reference for instalation.

Main difference is the 040 doesnt have a 'sock' connection but has an open end filter. It is recommended to mount the 040 as low as possible on the cradle so as to pick up better at the bottom of the tank.

You can secure the pump to the cradle with hose clamps and to help lessen noise, use rubber inbetween the pump and clamp and cradle.

Not sure whats the best rubber to use though? I used rubber fuel hose cut in half for mine.

:D

Is the 040 intank???

Its pretty easy to install, I have read the DIY for the 981 is this similar???

bob it is basically the same as a 984 except as pointed out there are hose ends at both ends of the 040, so you won't need to buy the adapters (to make a hose end) for the top of the pump. just hoses and clamps to fit the hose ends.

bob it is basically the same as a 984 except as pointed out there are hose ends at both ends of the 040, so you won't need to buy the adapters (to make a hose end) for the top of the pump.  just hoses and clamps to fit the hose ends.

The 040 has only got a hose end on the outlet side(top).

The inlet side is an open end filter.

The pic in the first post is of an 044.

Heres a pic of an 040.

bosch040pump.jpg

As you can see the inlet side has no hose connection so to the best of my knowledge a sock cannot be attached.

That is why if installing an 040 it is recommended to place it as low as possible on the cradle to avoid surge due to a low tank and/or cornering.

;)

are these things easy to install? i saw with the warlboro pumps u have to solder and shit... is this jus a direct replacement? 040 is the one..

Easy to install. no soldering required. direct replacement.

;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...