Jump to content
SAU Community

Recommended Posts

http://www.allblitz.com.au/cars/japcars/98gtx.html

1998 Nissan Skyline 2.5 GT-X

- 4 Door, Non Turbo

- 2.5LTR NEO Engine

- 104,000kms (Serviced Regularly)

- Silver

- Automatic (Triptonic) (Gears can be changed on steering wheel)

- Factory Navigation & TV

- Factory Keyless Entry

- Factory Engine Start

- Xenon light

- Timing belt has been exchanged

- No Accident History

Price: $18,900

Prices INCLUDE Compliance and 12 Months Registration

Link to comment
https://www.sau.com.au/forums/topic/74973-allblitz-r34-4-door-auto-18500/
Share on other sites

The GT-X has more features than the GT. It has the factory TV/Navigation System. Also has the HID headlights and some other extra's from what i know. Also, suprisingly the car has some impressive power: Max output: 200ps(147)/6000rpm, Max torque: 26.0Kg.m(255.0)/4000rpm

The GT-X has more features than the GT.  It has the factory TV/Navigation System.  Also has the HID headlights and some other extra's from what i know. Also, suprisingly the car has some impressive specs: Max output: 200ps(147)/6000rpm, Max torque: 26.0Kg.m(255.0)/4000rpm

The HID's would also have to be removed for compliance AFAIK :rofl: I believe you can get the TV system converted for aussie use though - however the GPS will not work, from what I know.

  • 2 weeks later...

only the rb20de engined r34 are not able. the rb25de is able to be complied due to being 105kw/tonne, and therefore over the threshold

http://rvcs-prodweb.dot.gov.au/sevs/030-00.htm

  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 4 weeks later...


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...