Jump to content
SAU Community

Recommended Posts

Finally run a half reasonable time

12.1 @ 111mph

but i have a question... last time with 200rwkw i ran a 12.90 with 200rwkw or there abouts.

now im up around the 300rwkw.

My time has gone almost a second up, yet my MPH hasnt changed one skeric really. Any ideas why that is?

I made a nice 1.90ft, same as my old 12.9 run was.

So they were pretty similar, jsut the times changed :headspin:

Link to comment
https://www.sau.com.au/forums/topic/75175-finally-a-decent-time-and-a-q/
Share on other sites

At Heathcote i was running 12.7@111 and i have around the 235rwkw mark. What was your half track speed? Should be around 87mph. Something sounds a miss even with a 1.9 60'. Are you sure you werent shutting down just before the line, Ive done that before.

What mph was your 12.9?

12.1@111mph you must be getting of the line pretty quick!, i only ran 12.4@112mph when i went - and i have 4wd launch!

oops, it was 109mph, and id run 110/111 just for times of 13.00/13.10 etc

my 660ft times was 9.3/80.7 mph... i wasnt backing off thats for sure.

I kept my foot in right past the little white checkers :rofl:

i went easy on the launch as the cars just burns the tyres if i try a decent one

my 660ft times was  9.3/80.7 mph... i wasnt backing off thats for sure.

I kept my foot in right past the little white checkers  :rofl:

i went easy on the launch as the cars just burns the tyres if i try a decent one

There is something wrong with that 660' time, your at least 1.0 off the pace and 8mph. Check it with your other runs at the 660' mark.

correction, stoopid a$$ me looknig at the wrong sheet

660ft was 8.00

mph/660 was 94.8=68

It has way more than it did wheni ran a 12.9, i seriosuly doubt there was another second in there back in its old form. I've changed nothing traction wise at all.

If anything the tyres are a bit older and crappier now than they were a year ago (12.9 @109mph/200rwkw)

I know the problem. :P

Well m yguess anyway is that the clutch was starting to struggle in the top gears, and what you though may have been wheelspin into 2nd nd maybe into 3rd was actually the clutch starting to give up...well perhaps a combination of both.

That night at Clader where you chopped me my clutch was getting worse with every run, by the end of th enight my mph had dropped 3-4mph when only running approx 200rwkws.

Anyway food for thought:)

with the power you claim your trap speed is way down might be an idea to run it up on a dyno just to double check maybe you have a problem ?. Your abit slow to the 660ft mark and you mph is down thing is your 60ft times aren't bad at all .

For whats it's worth I know my car is abit of a differen't kettle of fish but I have one of the slips here for a [email protected] and on that run went

660ft 7.837@91mph with a 1.8 60ft .

Also don't be fooled into thinking peak power dyno read outs are everything can you tell us abit more about the car and mods .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not at all, pure street use, touge, even drag strip and you'll be fine   There's a larger version of it too, however would be overkill for your application. If you do plan on using that sump, might as well fit a headdrain/crank case vent to help alleviate crank case pressure. Your mechanic will also notice you cannot re-use the AWD windage trays on the motor too, as it fouls with the AWD -> RWD sump. However given your usage, you'll be fine.
    • @GTSBoy yeah but the MAIN problem is that "you" guys may know that but i/my mechanic did not. I literally spend hours to find differences between Stagea and Skyline engine (even here) and found kinda "nothing" Yeah one guy mentioned that the block is larger/wider but nothing about the oil pan. Of course AWD has different one but "everybody" says...yeah just slap RWD pan... and the parts number for my N/A engine and NEO DET were the same so iam using one from my old engine. And of course being in EU/Czech many of the sites did not even show(i need VPN to be here)... @MBS206NO it is not my channel and not my video. Dont even know the guy. I just post this as a reference cuz i have the same problem. As i said you guys in AU/NZD may know this but here it is kinda a new info cuz IF someone doing this swap they already have oil pan or they make custom one.  @Dose Pipe Sutututu Yeah it is AWD RB25DET NEO Yeah as you mentioned the pick up is in a different place ...but i do not drift or track the car. It is and will be strictly street and just "casual" weekend cruiser. With that "custom" pan as shown in the video...could there be some problems?  For others. Iam sorry if that topic "looks" like i want to show/boost some YT channel or numbers. Iam quite the opposite.  I would rather drive my car thru sewers than get the attention that this car gets here. I do not have any YT channel nor IG/Twitter or TikTok. I just want some info from time to time cuz here...there is none :-) 
    • +2 Mine came with a bonus flat battery. 
    • Ha! 'Sif tailgaters work on logic or good sense.
    • +1. Good thing is people wont tailgate you for a while
×
×
  • Create New...