Jump to content
SAU Community

Recommended Posts

hay guys as it says i need anew clutch,

On the weekend i went to the drags with ash and a few other boys and stuffed the clutch buy frying it hard and now slips after 4000 in any gear so what should i get?

i have a R33 gts-t running aroung 220rwkw when boosted back up

i would like to know where to get it fitted and how much a new clutch will cost in total( drive in drive out all fixed) yes i am in melbourne and will travel most places.

Willing to spend say $1000 all up for everything is that enough?

thank guys

( and yes i have read all the post on the patrol clutch and still are a bit unshore of that direction)

Link to comment
https://www.sau.com.au/forums/topic/75228-need-a-new-clutch/
Share on other sites

I just had one fitted. 5 puck sprung ceramic clutch with upgraded pressure plate. Was $850 all up.

The pedal is now lighter than stock (yes, lighter) and bites like hell. Shudders a bit without enuff revs but I spose thats always going to happen. PM Dr_Drift as he installed mine...

I just had one fitted. 5 puck sprung ceramic clutch with upgraded pressure plate. Was $850 all up.

The pedal is now lighter than stock (yes, lighter) and bites like hell. Shudders a bit without enuff revs but I spose thats always going to happen. PM Dr_Drift as he installed mine...

what brand is it?

is sam at his new shop yet?

All the Rumors aside **Nissan Patrol Clutch fits**

http://www.skylinesaustralia.com/forums/sh...ead.php?t=21958

will suit your car if its 1993 - 1995. should handle what power your throwing at it, work out a bit cheaper and have same pedal feel

i have some one a everlution R looking in to the clutch from the patrol if it does fit cos the part number from that tred does not match the books every one has, so he is going to find one and try to fit it and match it so i might buy one from him.

what brand is it?

is sam at his new shop yet?

In the PM he quoted a Nismo clutch plate but may have put a different one in (long story). The pressure plate is custom. It is very streetable. Like I said earlier, the pedal is lighter than stock.

He's still at XTC in Coburg.

In the PM he quoted a Nismo clutch plate but may have put a different one in (long story). The pressure plate is custom. It is very streetable. Like I said earlier, the pedal is lighter than stock.

He's still at XTC in Coburg.

cool, thanks paul

:cheers:

  • 2 months later...
i have some one a everlution R looking in to the clutch from the patrol if it does fit cos the part number from that tred does not match the books every one has, so he is going to find one and try to fit it and match it so i might buy one from him.

hey mate,

sorry to dig this up, but did you end up fitting the patrol clutch?

if so do you have part no. of the clutch fitted? also where did you get the work done and what extra parts were replaced (bearings etc.)?

looks like mine is going, trying to weigh up all my options

cheers

I bough one off Jim Berry in QLD. It uses a gtr pressure plate reworked to just under 4000lbs and a 5 puck centre was $1300 delivered with a machined flywheel. It feels great softer than the Nizmo twin plate that i stuffed and grabs hard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...