Jump to content
SAU Community

Recommended Posts

I have one installed in the center console -  the detectors are mounted on the front & rear bar (for alerting to cops coming up behind me) - it picks up lasers and radors. You wouldnt know it was there if you didnt know where to look. It has always gone off with plenty of warning and is set to not go off at doors etc.

what model number is this one ?

i'd be looking for something similar to that

']im decidin whether to purchase the bel rx65 or rocky mountain. I know the rocky mountain is developed usin military technology. Rocky mountain is also very competivitly priced, and according to their website, they are faster then the beltronics. Only thing stoppin me is the fact that beltronics has such a good reputation. Ive seen one bloke sellling the rx65 for 500. If we manage to get a couple of blokes together we could possibly get it between 450-480 dollars a piece. Anyone interested??? I'll find out today wether he'll budge on the price.

Cheers.

Paul

make sure you can turn k and x band off, otherwise the radar detector, no matter what brand will be useless. important ;)

2. It is only used on the car mounted radars (and unless you do a lot of country driving these are few and far between)

On the contrary - There are bulk coppers on the freeways and suburban streets with K-band vehicle mounted radars. And my last big fine was at night driving on a city street and got done with a vehicle mounted radar :)

K-Band is used by most vehicle-mounted-radar cop cars to detect your speed. Why would you turn it off?

 

Pretty stupid.

ok then leave k band on.

It will go off every 30 seconds... how effective will that be?

It doesn’t take a genius to realise that if your radar detector is going off so often it will be highly annoying and also it will make you much less likely to react when there is actually a multinova or camera.

I will repeat the best and most effective setup for a radar detector for city driving is to use it primarily as a multinova detector and to leave k and x band off.

If your radar detector doesnt let you turn off k and x then get a new one.

This is not an opinion, it’s a fact.

I used a Bell 900 for quite a while and found it to be worthwile.

Every day when I went to work from Mandurah to Bibra lake - it was like a mine field of speed cameras/police.

It used to warn me in adequate time and I found it usefull. If your an idiot driver who thinks that they can speed all the time and be saved, forget about it.

The radar actually made me more aware of speeding and when it beeped it reminded me to slow down. Was very impressed. Im just annoyed that they are illegal in melbounre. If we had radar detectors here, the vic goverment wouldnt make any revenue.

Had one, got my window broken into and stolen!

My stupid ass fault for not taking it down...

Had it for a few months n never saw a single detector, got stolen and went past one within a week.. lol just how things work ay

I didnt find K band was bad at all, but if u leave X band on dun go past ANY shops beep beep beep hehehe

in one of my mod's can turn x band off, i herd police dont use x band anymore, but for sum reason im speeding less with it :S, havent found a speed cam to try mine out but worth having one and all.

actually i have but it beeped when i after i drove past, got o learn the best place to mount this thing, pointed around and it picked it up like 300-500m away. soo im not too confident with these things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...