Jump to content
SAU Community

Recommended Posts

Hi guys (i'm based in Sydney),

I've got an R32 GTR with the below mods:

- HKS GTRS turbo's

- Tomei pon cams 260'

- 700cc injectors

- Nismo afm's

- Trust sump kit

- Apexi PFC

exhaust etc...

Now its time for a dyno tune by either Bel Performance & Croydon Racing Development.

I need to make a decision by Monday so who best to ask other than GTR customers that have actually utilised dyno tuning services by the above workshops.

I need feedback, criticism & honesty so please all posts welcome ;)

My decision making will be based on this thread.

Regards,

Marko

0404 884 876

Hey Marko, as you know my car is at BEL right now.... and with their new workshop I am sure they will be doing a good job! :cheers:

they were even so kind as to open up at 7pm on a sunday night so I could drop the car off prior to going away for work....

I think you would be more than happy with the personal service you will get...

Hey Marko,

I've known Ben and Eric at BEL for a while now and they have always been the most helpful. I bought a power fc second hand from one of their other customers which was road tuned and plugged it in my car and it was perfect. Fantastic air/fuel ratios made 226 kw at all 4 wheels on 1 bar. I'll stop babling, they are great tuners.

thx guys for the feedback.

williams f1 (ben) i saw ur car there tonight, the wheels look nice!

wrxhoon & mik (father & son right?) my setup is very similar to your r33, ben mentioned u cracked an 11.3, great result, i would be very happy with that in my car.

gtr fan (is this steve, i bought the injectors from u right?)

now i need to make my own decision, i've posted this in another sub-forum on the sau site, on the other side of the fence they all think crd is pick...what to do hmmm...

clarity is what im seeking

G'day Marko,

good to see you liked the wheels! should have the RE55's on there in July!!!!

I think the guys at BEL are taking a big step up in the tuning world by having the in house dyno, and should be a force to be reconned with once the workshop is fully set up!

how was my car looking? Im away (in HK right now) and back on the 7th so they have plenty of time to get it working perfect!

I think they have a great balance in price and in quality of workmanship....

main motivation was to be able to have someone that will listen to what you want, and that they would have care for the equipment....

also they responded fast with any questions asked with quality info....

oh and Jerry said they are guns!

hope they sort out the little quirks you always have when adding so many new things to a car!

for one the boost comp (blitz SBC R) I have no idea how to work as yet..... but they do! :cheers:

value and quality.....

I felt CRD are great! but may lack in care factor....

Marko,

Just a friendly mod suggestion. Please post just once in the future when you'd like to know something. There is some great input from people over your two separate threads and I'm sure it would be easier for you (and everyone) to read if it was in the one thread.

As for weighing into this debate, I have a mate who took a lightly modded GTST to BEL and got great results. I also know someone who took a heavily modified GTR to CRD and got great results...:cheers:

Vijay

Hi Vijay,

Reason i posted 2 threads was to hear both sides of the story which i knew i would get as a result (now proven), i also mentioned in the thread that i have 2 posts on the same subject but yes your suggestion also works.

crd or bel - i think at the end of the day nothing negative can be said about either of the 2

now comes down to how much will i spend on the tune?

I think the question you need to ask is who knows the RB26 better.... sure its not as cut and dried as just pressing buttons, but at the end of the day anyone can tune a computer given some time to figure it out...... its whether they know whats best for your engine, that is what you should be asking.

bel has a better care factor for sure!

i could go on about crd but it is not allowed on this forum.

for a direct comparison of tunes a friend recently got a crd pfc tune(along with other stuff he bought), seemed ok did not ping but also did not make good power, power came on hard then died off early in the rev range, seemed peaky.

got car retuned at bel as he was unhappy with the tune, still no pinging with new tune, but power comes on very smooth and early, and pulls harder to higher revs, which was obviously nicer(faster!)

Yeah Bel's cust service is awesome, as is their turnaround times etc. My ceffy gets all its work done at them, and to date they've been very helpful and they know their shizzle when it comes to RB's.

CRD though has more experience in high power tuning and has had more exposure... so hard call...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...