Jump to content
SAU Community

Recommended Posts

Hi

Currently I have 17inch rims with 235/45/r17 tyres (Nankang, hehe) and need to replace them as the tyres are causing steering wheel vibration at speeds over 110km.

I have come up with 2 options, which is 'better'

option 1

Buy 4 235/45/r17 quality tyres such as Dunlop SP3000, Michelin Preceda or possiblay SO3s

option 2

Get 18 rims 8.5" at the front and 9.5" at the rear with Hankook Venus Sport "K104" rubber. 235/40/18 front and 265/35/18 rear.

These rims will make the car look better too

Which option will give me better performance???

Link to comment
https://www.sau.com.au/forums/topic/75381-tyre-quality-vs-size/
Share on other sites

check out the maxxis victra in 235 /17 sold by bob jane. came out very well in the recent motor (wheels?) tyre test that included ost of the big name brands and tyre types, and half the price of most of them. 4th overall and there was nothing in the diferences really ie .06 sec through the slalom etc

check out the maxxis victra in 235 /17 sold by bob jane. came out very well in the recent motor (wheels?) tyre test that included ost of the big name brands and tyre types, and half the price of most of them. 4th overall and there was nothing in the diferences really ie .06 sec through the slalom etc

And thats not a lot???

For my 10 cents worth you are much better off spending your hard earned on a better set of tyres rather than set of larger tyres. The most marked difference will be in the amount of wet weather grip the tyres have - ie grip when you need it most.

By and large there are cheap tyres & there are good tyres.

If you want a set of 18 inch rims for looks then that is a completely different argument. Remember though, that for an equal quality rim a 17 inch set up will be lighter than an 18 inch. If you end up with a cheap 18 inch rim then it will be much heavier - to the detriment of your ride & handling.

And thats not a lot???

ummm...under the circumstances no, i don't think it is. we're talking six hundredths of a second slower, such a small amount of time that on any other given day it might have been six hundredths faster. i think that's bugger all. sure if you're trying to shave tenths each lap it's considerable but we're talking a $200 street tyre here. if you can justify spending twice the amount for a street tyre that's .06 sec quicker then either $ don't matter, you are always able to drive at warp speed or you need to drop your card to ferrari. the victra beat most of the better known brands in a lot of areas and all of them in others such as wet braking, which i'd have to say is pretty important in terms of keeping my car and hard stuff away from each other on the street where there are no run offs.

for some reason the noise test, in which the victra did very well, wasn't included in the points score. if you saw how close the overall results were you can't help but wonder why the noise result was left out of the points score.

i simply reckon they're worth a try on the basis of the test results.

cheers

ummm...under the circumstances no, i don't think it is. we're talking six hundredths of a second slower, such a small amount of time that on any other given day it might have been six hundredths faster. i think that's bugger all. sure if you're trying to shave tenths each lap it's considerable but we're talking a $200 street tyre here. if you can justify spending twice the amount for a street tyre that's .06 sec quicker then either $ don't matter, you are always able to drive at warp speed or you need to drop your card to ferrari. the victra beat most of the better known brands in a lot of areas and all of them in others such as wet braking, which i'd have to say is pretty important in terms of keeping my car and hard stuff away from each other on the street where there are no run offs.  

for some reason the noise test, in which the victra did very well, wasn't included in the points score. if you saw how close the overall results were you can't help but wonder why the noise result was left out of the points score.    

i simply reckon they're worth a try on the basis of the test results.  

cheers

:werd:

I read that test and it looks like that tyre gives by far the best bang for buck performance out of the group.

would be good if someone who had them could report on just how long they last as i think they could be quite a soft compound?

:werd:  

I read that test and it looks like that tyre gives by far the best bang for buck performance out of the group.

would be good if someone who had them could report on just how long they last as i think they could be quite a soft compound?

Hi Interloper;

my thoughts exactly, not sure about the wear but I've had Yokos go hard after about 60% wear so who knows. but at about $200 per tyre it's a chance i'm prepared to take.

Regards

Hi Interloper;

my thoughts exactly, not sure about the wear but I've had Yokos go hard after about 60% wear so who knows. but at about $200 per tyre it's a chance i'm prepared to take.

Regards

i will be after some in the near future, so let us know what your thoughts are if you end up buying them.

:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...