Jump to content
SAU Community

Recommended Posts

Hey all

my R32 rb20det has been backfiring during gear shifts, not huge backfires just a small pop just as i take my foot off the throttle, i have recently had probs with bov's (when i bought my R32 it had 2 bov's, the stock one and a second HKS mounted near Airbox) i had busted the plastic nipple where the hose joins (this bov is pretty old, i think the whole setup is factory but have only seen one other R32 with same setup, possibly a factory extra?) i replaced the pipe that had the bov on with one that didnt leaving only the stock bov but still had same prob, i ended up repairing the HKS bov and put it back on the car but prob is still there and gettong more frequint.

any suggestions on how to fix prob or if the 2nd bov was a factory extra would be great

Link to comment
https://www.sau.com.au/forums/topic/75511-small-backfire-during-gear-shifts/
Share on other sites

the hks one would have been fitted after....you should remove them both and get a new bov for the factory position, they arent expensive these days.

stock bovs arent much chop, and neither are the early hks ones, and running two bovs is a silly thing to do on an rb20, no need for it.

popping is due to richness, which if you have air leaking from one of the bovs it wont adj fuel to match the air loss. atmospheric bovs cause it to backfire, but if its only just started, id say you have a problem.

cheers

Linton

Hey all

my R32 rb20det has been backfiring during gear shifts, not huge backfires just a small pop just as i take my foot off the throttle, i have recently had probs with bov's (when i bought my R32 it had 2 bov's, the stock one and a second HKS mounted near Airbox) i had busted the plastic nipple where the hose joins (this bov is pretty old, i think the whole setup is factory but have only seen one other R32 with same setup, possibly a factory extra?) i replaced the pipe that had the bov on with one that didnt leaving only the stock bov but still had same prob, i ended up repairing the HKS bov and put it back on the car but prob is still there and gettong more frequint.

any suggestions on how to fix prob or if the 2nd bov was a factory extra would be great

is your car auto by any chance?

the auto R32gtst's have this weird thing on the pipe that comes from the intercooler that joins up with the crossover pipe, at about the level of the airbox...

its like a little pipe that is blocked off with a rubber thing around it (bad description, i know...)

don't know why its there but it is on the auto's and the ex-owner may have used it to mount a bov

is your car auto by any chance?

the auto R32gtst's have this weird thing on the pipe that comes from the intercooler that joins up with the crossover pipe, at about the level of the airbox...

its like a little pipe that is blocked off with a rubber thing around it (bad description, i know...)

don't know why its there but it is on the auto's and the ex-owner may have used it to mount a bov

ive seen it on heaps of manuals also,

its weird

is your car auto by any chance?

the auto R32gtst's have this weird thing on the pipe that comes from the intercooler that joins up with the crossover pipe, at about the level of the airbox...

its like a little pipe that is blocked off with a rubber thing around it (bad description, i know...)

don't know why its there but it is on the auto's and the ex-owner may have used it to mount a bov

car is manual and the hks bov is mounted in same position as that weird pipe thing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...