Jump to content
SAU Community

Recommended Posts

Ok, Im looking at sway bars for the cefiro, as Im still not happy with the set up even with rasing the car, the corner balance, numerous oppinions and suggestions (which are all almost identical) in terms of front end set up with camber, caster etc.

Sooo, pros and cons of them. How do they work, why are they needed/not needed. Is adjustable worth the extra money, and finally, Id be using S13 ones, the cef is obviously a fair bit more heavy, and this Im guessing would be even more so on corners, braking etc due to inertia, so keeping that in mind would I need to go bigger.

BTW, the idea of the car is good for normal street driving, more spirited street driving, and then for some semis to be thrown on the car for track stuff. Basically set up for fun, not professional race car or drift car.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/76017-sway-bars-yes-again-i-searched/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

swaybars will not affect the ride or comfort in a straight line, they dont have the same affect as shocks and springs or bushes... their proper name is anti-roll bars.

they connect the chassis to the control arms and hold it stiff through out corners, reducing body roll, keeping the car centred throughout the corner. alot of coilovers are that stiff that emphasis on swaybars is not so important. if you want to see how much of an affect swaybars have, remove them all together and go for a drive...body roll central as the car is relying on the springs to take the weight of the car + inertia of the corner.

they dont affect castor or camber, or any alignment specs.

aftermarket adj. s13 ones will be fine in the ceffy, they arent that much heavier. yes it is worth getting adjustable ones.

hope that helps

cheers

Linton

Probably the thing to recognise is that the anti-roll bars don't much affect a car's ride/handling compromise in a straight line. It's the dynamics of lateral weight transfer when changing direction (turning) that they impact on quite significantly. Adjustable bars can give you the option of quickly altering the dynamics, say if you wanted to induce specific characteristics for drift or circuit work.

For handling upgrades there seems to be two schools of thought: big bars; and high-rate springs. Anti-roll bars at least allow you to retain ride quality and power-down because the wheels can maintain closer contact with the ground imperfections rather than the chatter that can occur with rock hard springs. Adjustable bars allow you to mimic the effect of installing different size (diameter) bars by changing the leverage rate between the bar and chassis. Using them just gives you the option of making the car respond differently, quickly.

Anti-roll bars are actually a laterally mounted torsion bar (spring). Because they store and then release engergy, they impact on the RATE of lateral weight transfer and hence the rate of suspension movement, they control the rate of camber change that a given wheel experiences in that cornering moment. So yes, bars will not affect your static suspension settings - but in the dynamic environment they will. That is partly how changing their sizes brings about handling differences.

I looked on the whiteline site before, and they seem to be about $500 for a set (havent done the normal run around to find the cheapest price yet).

I was going to say is $500 worth it compaired to say 'X' something else, but I dont think there is anything else that I can do without going nuts.

Im still interested to know someone whos done some track work with out them, but say decent suspension gear, then got the sway bars on, and whats their lap time improvement been like.

I looked on the whiteline site before, and they seem to be about $500 for a set (havent done the normal run around to find the cheapest price yet).

I was going to say is $500 worth it compaired to say 'X' something else, but I dont think there is anything else that I can do without going nuts.

Im still interested to know someone whos done some track work with out them, but say decent suspension gear, then got the sway bars on, and whats their lap time improvement been like.

Same springs, same shocks, same tyres, same camber , same caster, same engine power, 3 seconds a lap faster at Eastern Creek.:cheers:

Aftermarket sway bars are a 'good thing', but to say they dont affect ride comfort is simply not true. A heavier sway bar reduces the 'independance' of the rear suspension, and thus ride quality is definately affected.

I got a whiteline swaybar for my r33, it was like just under $200.

I've got no clue about racing/suspension etc etc, but I think it made a differance to the handling, the car was more reponsive when turning, Kinda made it feel abit heavier and smoother. It felt safer and more comfortable going round the corners faster than before basicaly.

Aftermarket sway bars are a 'good thing', but to say they dont affect ride comfort is simply not true. A heavier sway bar reduces the 'independance' of the rear suspension, and thus ride quality is definately affected.

Not a big issue that, with the suspension and the diff, its not that comfy to start with :)

ionos.... ive had heavier swaybars fitted to all my cars, havent got any for the 33 yet though. but on my honda, r31 skyline, and my 00' subaru liberty, and didnt notice any change in driving in a straight line, also made cornering much more stable and comfortable, body was all over the shop and carrying on.

what makes you say that ride quality is affected??? with swaybars, there is no downside.

They are going to be put on the back burner for a bit anyway. Spoke to another suspension shop and they seem to think most of my problem is set up (and they said new whiteline price list is coming out soon and they are going to be cheaper). But he seems to think TOO MUCH castor, and too much rear camber. So what he is saying is fix that up first, see if thats whats causeing oversteer still (which he was quite sure would be). Then go sway bars after that to see what effect they have. But he didnt want to try and bandaid the problem.

Daveo - not to hi jack but I'd like to post some observations from a drive I recently did and the things I noticed and if they're the same as you are trying to get rid of.

Basically, 2 things. One was I seemed to get a lot of 'washy' understeer from corners around 70-100kmh which resembled driving a GTiR. That is, it wasn't full understeer but enough for me not to like and feel the front wheels slipping through the corner. This was not at redline but probably about 50% rpm or less (because I didn't feel like coming off the corner heh heh so wasn't pushing it).

The second was when braking late (I didn't anticipate the corner being so long and so angled) the car really REALLY felt like going to the apex. Fair enough I realise that's just bad driving but it was the first time I really felt the weight of the ceffy. I would have thought you can counter this somewhat by suspension settings.

Are these the things you are also experiencing? Because as far as I know I don't have sway bars (or if I do they're stock).

Not hijacking at all dude, its good to see what others cars are doing.

The first bit kinda... atm I find my car really quite settled, never too scared to keep the boot in. Plus we have changed mine so it WONT kick out, it just seems if I power down, it goes straight (no where near as much as it did before we raised it 2inches) And the outsides of my tyres are still wearing more than the outside.

I find with braking tho mine is fine, I'll out brake most cars, doesnt feel heavy or anything. And I still need to get braided lines, and a brake booster stopper on. But I did get the sensation you are taking about, its more so a mental thing I think, as you reaise its getting a bit close a bit fast, so you think the car isnt slowing down. ;)

......he seems to think TOO MUCH castor......

That seems an unusual thing to say. The only real downside to heaps of castor is heavy steering, and since we all run power steering thats not an issue. How much caster are you running?

Daveo - cheers.

1- When you say straight - do you mean straight into the apex against the way the wheels are pointed? if so that's what I felt.

2- My brakes are great, r32 type M + project mu brake pads. The feeling I meant was the car had no problem stopping, but if you picture heading round the corner, just before the apex, lock it up and you'll head straight out of the apex and off the track. This is the sensation I mean.. the feeling that the car is just... very much heading out of the apex on a late brake. I know you'd get this with any car but the ceff I just felt it a helluva lot more (for what seemed to be not much late braking at all) than I expected.

That seems an unusual thing to say.  The only real downside to heaps of castor is heavy steering, and since we all run power steering thats not an issue.  How much caster are you running?

What he is saying is it induces bump steer etc, and for the extra bit of stablity you get its not worth it. Remember cefiro is S13 suspension, so not as good as skylines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This is awesome.     
    • Thanks for the quick replies guys its appreciated. A small extension was welded onto the standard 6boost external gate pipe which you can see where the pipe goes from black to stainless just below and to the right of the rear housing in the first picture. Overall I would say the flow is pretty good other than 6boosts choice to come straight off the collector at a decent angle.. Not sure why I went with two valves, I originally replaced the stock twin bovs with the GFB when I had the twins on. When I purchased the EFR it came with the Turbosmart Kompact BOV so I figured that would be a better option than the stock EFR Bov. I don't believe the Turbosmart BOV is adjustable? When I get the spike and then sudden dip in boost pressure, the turbo speed does drop as well. Stock head size wise however I believe it has Neo Turbo springs and a Neo Turbo intake camshaft and an aftermarket exhaust camshaft in the vicinity of 260 degrees. We didn't try a different MAC valve, we tried two different ways of plumbing it and we also tried removing the mac valve entirely and just having the boost source from the turbo directly connected to the wastegate and it still spiked / dropped and exhibited the same behaviour. Standard R33 GTR 5 speed tansmission. I'm running a Haltech Elite 2500 and can provide some logs if you. I understand what you're saying in that it looks like an auto plot however no, it's still a manual and it just has a lot of torque down low, for all intents and purposes it's a very impressive street car. I've attached a photo of the quickbitz dyno plot which was when the only difference is I was running -5 twin turbos with a mac valve. As you can see theres a decent dip in AFRs between 125kmh and 135kmh. Our problem now is not that the AFRs are dropping, just the boost pressure is dropping, however it is evident in the same RPM range of the map, coincidentally or not.
    • What transmission are you running?  It's a bit tricky with the scaling, but at face value the power "curve" looks more like a "line" which is a bit odd... basically a lot more like a dyno plot I'd expect with a highish (compared to a factory auto) stall torque converter type setup. If this is running an auto then this kind of boost control challenge is definitely a thing, the rpm scale on the dyno doesn't reflect what the engine is actually doing (unless the dyno has access to the engine's ACTUAL speed electronically) and what you'll get is a big rpm flare up as the engine torque launches past the converter pump's ability to resist torque at that rpm, then as the converter starts picking up rpm it will kinda even out again and the engine rpm will pick up more steadily. The trick with this "flare up" is if it's kinda near the boost threshold for the turbo then the engine's airflow requirements to maintain the previous boost level will outrun the turbo's ability to supply that boost - so you end up with a natural flattening off, if not dip when that happens.   If you are running closed loop, or even tune the "feed forward" wastegate duty cycle to deal with that rpm spike then when the engine starts settling to a more typical climb you'll actually have a situation where the gate is "too closed" and boost will run away for a bit, then have to pull down again.      It's not trivial to get this perfect as most boost control systems are generally expecting more predictable engine rpm rates of change, but if you *know* that's whats going on then you can at least "accept your fate" and realise getting that area perfect is kinda chasing your tail a bit, and assume that if the rest is working sensibly and the spike/dip isn't completely uncontrolled then you should be good. Sorry if I've gone off on a tangent, but the dyno plot and boost control behaviour look a LOT like what I've seen tuning autos in the past. What ECU are you running? Could possibly be convinced into looking at logs if I get too bored this weekend haha.
    • A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
×
×
  • Create New...