Jump to content
SAU Community

Recommended Posts

Complete kit, consisting of:

HKS highmount manifolds

Twin HKS wastegates

Two Garrett 3037S spec turbos - HKS 0.73 A/R rear housings

Exhaust pipes to cat

Piping from turbo to intercooler

Was planning to use this *when* my motor was built, but due to unforeseen circumstances this is being abandoned. Everything is in perfect condition, turbos are brand new still in their boxes. Was bought as a HKS 2835R kit and upgraded the turbos on it. Still have the 2835R's if interested in them.

$8500 ono

Also 4 layer Trust intercooler, 600x300x135mm will sell with the turbo kit for $1500

Tons of other parts, 280 + 290 cams, 1000cc injectors, Cusco front diff, etc etc. that would suit such a buildup.

Edit: 29/8 - parts are all sold!

Link to comment
https://www.sau.com.au/forums/topic/76226-hksgarrett-twin-3037s-spec-kit-rb26/
Share on other sites

They are packaged in Blitz boxes, made by Denso (as they all seem to be). $1000 for the injectors.

Edit: Just took one out of it's box for photo - the others have never been opened.

Injectors are sold. Asking $2,000 for the intercooler seperate from the turbo kit. Located in Sydney. Workshop was closed over long weekend, so was unable to do much about it.

JUN plenum might be available in the near future, the person who has it is reconsidering the direction their project is headed. Will post up if it's for sale, but until then not much I can do :D

god ****ing damn if only i had 8000 spare i'd offer that for the complete twin kit

but well yer just spent about that much of a 26 for the silvia : they'd be insane in a little silvia ;)

good luck to who ever buy's this insane turbo setup

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...