Jump to content
SAU Community

Recommended Posts

Hi as the proud new owner of a series 2 R33 I am seeking to buy (not straight away) a Power FC and FMIC can anyone help me in terms of good places to get these from for a not too steep price and where they know what they are doing. How much am I looking at all up? Cheers!

Hey fella, I get my car tuned at Graham West on Marion Rd, They sell PowerFC and have a sht load of data for them, really down to earth guys, not too sure how much but check them out!!

Darren :uh-huh:

I normally use nengun.com & greenline.jp as a good price reference. Also, check out the 'group buys' section they regularly have cheap FMIC & Power FC's.

Not sure where you live, but some reputable workshops/ mechanics which many on here go to are - Tilbrook, Boost Worx & Morpowa (that's where I take my car).

In terms of mechanical services & dyno tune prices your looking at:

5,000kms service $120-$220

General dyno tune $140-$250

Initial Power FC dyno tune $400-$600

Have fun with the line.

like pkblade stated there are many places where you can get pfc and fmic's from. Its best to look around and find out general prices b/c bargains comes up all the time especially in the for sale section and group buys. btw if you want some maintence done to car at a relatively cheap price refer to this thread here. http://www.skylinesaustralia.com/forums/sh...ead.php?t=74556

you'll find PowerFCs with hand controller delivered for around $1,000 through traders on nissansilvia.com, and Ebay is your best bet for a Hybrid FMIC if you want a cheaper option cooler (I have one of these and they are great) - I think kits with piping are going for around the $900 mark atm.

you'll find PowerFCs with hand controller delivered for around $1,000 through traders on nissansilvia.com, and Ebay is your best bet for a Hybrid FMIC if you want a cheaper option cooler (I have one of these and they are great) - I think kits with piping are going for around the $900 mark atm.

Yeah I got my POWER FC and Hand Controller via BUSKY from the nissan silvia forums..

It was delivered in under 2 weeks.. and passed customs no probs.. coz the guy wrote.. USED.. R34 POWER FC..lol.. so didn't pay any import customs tax.. but yeah .. ppl in adelaide were quoting $1600+ and I was fark..no.. for $1650 I got POWER FC and AVCR. So yeah shop around in forums.. as for FMIC.. I got my blitz coming from nengun.com. Apparently the HKS aluminium was on sale a few weeks ago.. only $1500 or so.. compared to $2000+ others ask for locally.. correct me if I'm wrong on some of these prices but.. yeah.. I reckon they are pretty accurate.

But for instant cheap power do a search on the forums..concerning changing the solenoid in the R33 to make it 10psi.

If only I could do it on the R34... :whatsthat

Have fun boosting mate..

Iceduck out

:Pimp2:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...