Jump to content
SAU Community

Cheap Willowbank (QR) Track Day Monday 11th July 2005


Recommended Posts

Anyone interested in a private track day at Willowbank on Monday 11th July 2005?

Looking at 8 cars on the track at once

+ we will have the option to choose which track we want to use (and can change it between sessions if required and if agreed by the riders).

gates open at 8:00am for a 8:30am start

Cost will be $110.00 each and spectators are free

Numbers are limited so let me know ASAP

At this stage numbers are limited to 40 for a half day session (8:30am - 12:30pm), if there is more interest and more numbers we can look at extending the session to 5:00pm if we can get 50 people

I have set up a CBA account for the track day

Commonwealth Bank

BSB: 064 183

Account: 10117368

You need to put your username on the deposit so I know who has paid.

Regards

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

Might be if I can get some time off work will let u know.

I haven't had a track day before so where do i go and

what do i need to bring? I'll take it pretty easy being

my first time etc.

Mines a 34gtt tiptronic hope thats ok. The brakes are good

with plenty of meat on the pads.

Zymotic / Genesis / maccattack,

Usual safety gear required:

Helmet

Long Sleve Shirt

Long Pants

Shoes

I would be good to see you guys attend + any other Skyline Australia menbers

+ Don't forget that it is free to spectate.

Don't forget I will need payment of the $110 ASAP (account details in the 1st thread).

Make sure that you include your user name on the deposit so that I know that you have paid.

Regards,

The following Skyline Australia members have expressed an interest in attending the track day:

EVO Cam - EVO 8

Zymotic - 34GTS

Maccattack - 33GTR

Jlnewton - 33GTR

Genesis - 32GTR

Ebola -33t - 33GTS

I hope that I have the correct vehicles noted.

Please confirm your attendance and arrange payment of $110 for the track day.

Account details are in the 1st post or if you prefer you can pay Paul.

Please make sure that you include your username so I know that you have paid.

Regards,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...