Jump to content
SAU Community

Recommended Posts

lucien it should be much higher than that. when stone cold in the morning it should be up around 8 at idle, once warm should be above 2 at idle and driving at 3000rpm should be above 4. that is for a fairly fresh motor with a healthy oil pump etc. when giving it a 'boot' (talking 5000rpm+) it should get to around 6.

don't stress too much over it. my last car had much lower oil pressure than this one and it never had any major problems.

what is it when stone cold? mine is always above 6 when cold.

It's to be expected on an old motor i guess. things just wear. i am just lucky that i have a rebuilt donkey.

I'm not stressed, just annoyed. I've had about six hours use out of my car since getting it back -- that's after about 7 weeks off the road -- and now there is the possibility of another problem. I'd kill for, oh, say a month of hassle free motoring.

Re: cold start pressure, I didn't notice and I haven't had time to check today. Either way its going to pay Dr Nathan a visit on Monday. Fingers crossed it just the sender (which seems very common from what I have read).

I'm not stressed, just annoyed.  I've had about six hours use out of my car since getting it back -- that's after about 7 weeks off the road -- and now there is the possibility of another problem.  I'd kill for, oh, say a month of hassle free motoring.

Re:  cold start pressure, I didn't notice and I haven't had time to check today.  Either way its going to pay Dr Nathan a visit on Monday.  Fingers crossed it just the sender (which seems very common from what I have read).

RB26 oil pressure at idle 1.5 , @ 2000 rpm 3 and @ 6000 4.6 , at normal oil operating temperature , oil takes longer to get to normal temp than coolant .

Dont worry about cold temp pressure as it will vary depending on oil temp .

Pressure will vary depending on oil used and age of oil as well .

Edited by wrxhoon

Just to add another data point, I'm running 10w40,

I have:

4-5 @ cold idle and driving,

2 @ warm idle,

4 @ warm regular driving,

4-5 @ warm "vigorous" driving.

That all seems fine to me, and until a credable source convinces me otherwise, I'm happy with it. :D

Edit: Engine is a R32 RB20DET.

Edited by Oosh

i have a rebuilt RB25 less than 10,000km old and the oil pressure does a similar thing to what has been mentioned in this thread... in traffic or on reasonably warm days the idle oil pressure sometimes dips below the 2bar mark... it looks as if the guage is a bit sluggish and slow to react

not good for the heart after you have dropped 6k on an engine rebuild and the oil pressure looks sluggish... time for a new guage and sender methinks!

i have a rebuilt RB25 less than 10,000km old and the oil pressure does a similar thing to what has been mentioned in this thread... in traffic or on reasonably warm days the idle oil pressure sometimes dips below the 2bar mark... it looks as if the guage is a bit sluggish and slow to react

not good for the heart after you have dropped 6k on an engine rebuild and the oil pressure looks sluggish... time for a new guage and sender methinks!

Rb 25's have slightly different oil pressures .

Idle 1 , @ 2000 rpm 3.5 and @ 6000 rpm 5.6 , the reason its lower than rb26 at idle is the idle speed is lower on the rb 25 .

Thats how the oil gauges are slow to react , if you are worried get an aftermarket gauge .

A lot of rb 26's that have restrictors fitted will have higher oil pressure .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...