Jump to content
SAU Community

R33 as a weekend track racer. Any good?

CrazyNuts
 Share

Recommended Posts

JCMarshall_Law Proficient

JCMarshall_Law

Posted
Posted

I have mine for a while now and I take to track days about 3 times a year, personally I think the 33 is a great car for daily driving and a few fun track days.

Just spend $1000 on the whiteline handling kit and polyurethane (spelling?) bushes all round. Get decent brake pads and keep the car in good condition and you will have a really fun and reliable track car.

When I bought mine, I was thinking I would spend money on getting more power but after my first track day my cash has gone into handling - much more rewarding I think. Having said that I still plan on doing the intercooler, Power FC, boost controller.

So far I have got Bilstien shocks and springs (damping adjustable up front), front and rear strut braces, whiteline swaybars, polyurethane radius rod bushes, 17" wheels with 235 falcons and bendex ultimate pads all round. Engine mods are just the basic exhaust, pod filter and grounded boost solenoid to give 7psi. All this makes a fun track car and I keep up with skylines with 40kW more power but standard suspension.

I'm just planning on getting a new set of dba4000 front rotors and pineapples (rear subframe bushes) then I'll move onto the engine.

Trust33 Grand Master

Trust33

Posted
Posted

Have another drive of your friends r33 and get another veiw of it.Boost that is.Cause you wont get the turbo to spool quicker than the stockie unless you downgrade.So when you do upgrade the turbo you can kiss your dreams of earlier spoolup.But having said that you could allways throw in a set of cams,or just make do with what you have got with whatever turbo you choose.

R33's are quick and honestly unless you know how to controll drift/oversteer you wont want that much more power to start with unless your suspension setup is an equal match for driver and vehicle.

The mods you have listed are a good power upgrade for the 33.The pfc is a must if you want any hope of making 200rwkw.

Because as you probably have allready have read the stock ecu will run the fuel maps dangerously lean when upping the boost with the above listed mods.

HAPPY BOOSTING :)

CrazyNuts Apprentice

CrazyNuts

Posted
  • Author
Posted
R32's make better track cars..

I don't want to get an older car than 10 years. Plus i don't really like the look of the R32

I think a stock R33 with suspension mods will suit me fine. I don't want to build Gondzilla...i just want something fun.

When i DO get a dedicated track car, i will be looking at a R32 GTR and mod the shit out of that instead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...