Jump to content
SAU Community

Recommended Posts

if you get shinny finish you can just wet rub it with 1500 grit and water and get a perfect mat surface..... Im still keen on all part I first said I was, but I want a more indicative price on what the difference is between full carbon and, composite.

  • 2 years later...

these guys are quite cheap mate of mine got 2 doors and boot in carbon delivered for bout $2000

http://www.racepro.co.nz/bk_nissan.htm

Edited by jas/slo32
these guys are quite cheap mate of mine got 2 doors and boot in carbon delivered for bout $200

http://www.racepro.co.nz/bk_nissan.htm

Door skins on the outside or the inside part?

Im up for that stuff for $200. Can you organise it? :D

lol might be an idea to look at when this thread started :P

Fark, june 2005. Wonder if he's still haggling for a good price ?

Edited by SNISMO

sorry mate $2000 full carbon doors inner and outer bolt them on and also bolt in internals and cards ( complete carbon doors ) as used by heat treatments racing and boot for that

  • 1 month later...

gday mate are the headlight intakes on r32 gtr the two inserts under the headlights but more central in the front bar? if they are what was the asking price for some in carbon fibre with the shiny finish? cheers

post-49662-1209795918_thumb.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...