Jump to content
SAU Community

Recommended Posts

SOLD!

BNR34 wheels for sale:

F: 18 x 9 (+30) with Falken Ziex (!) 512 235/40/18

R: 18 x 9 (+30) with Bridgestone V Grid 235/40/18

Overall, wheels are in decent condition. All markings are superficial and the wheels are structually sound. Tyres have approximately 50% tread remaining with more wear on the outer edge. It appears the tyres have seen some hard driving however and one will require replacement due to puncture and subsequent repair.

Pics attached (quite large to fully demonstrate condition):

IMGP0946.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0947.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0961.jpg

Wheel 1:

http://img.photobucket.com/albums/v310/j-p...us/IMGP0950.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0951.jpg

Wheel 2:

http://img.photobucket.com/albums/v310/j-p...us/IMGP0963.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0965.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0966.jpg

Wheel 3:

http://img.photobucket.com/albums/v310/j-p...us/IMGP0967.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0968.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0971.jpg

Wheel 4:

http://img.photobucket.com/albums/v310/j-p...us/IMGP0956.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0957.jpg

http://img.photobucket.com/albums/v310/j-p...us/IMGP0959.jpg

$2,400

Located in Sydney.

Kind Regards,

Jeff.

Link to comment
https://www.sau.com.au/forums/topic/77066-fs-bnr34-wheels/
Share on other sites

I assume they are from a R34 GTS-T and not GTR? Haven't been able to open any of the links to see the photos.

Thanks

Don't know if you've seen the centre caps that say "GTR" on each of the rims!

My mates' been after a set of these, price seems good. i'll let him know. Good luck with sale.

Link to comment
https://www.sau.com.au/forums/topic/77066-fs-bnr34-wheels/#findComment-1410869
Share on other sites

Generally, you would stretch a thinner tyre over a 9" rim to try and fit them under guards - or, they may have been the closest, cheapest thing available at the time... who knows.

From what I have seen, BNR34 wheels are a popular choice for many R32/R33/R34/S13/S14/S15/JZX81/JZX90/JZX100/etc.

Anyway, enough chat - please keep talk to the sale at hand.

PM's replied.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/77066-fs-bnr34-wheels/#findComment-1413695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...