Jump to content
SAU Community

NSW Drift Competition Round 3 - Wakefield Park.

Bakadesu!

By Bakadesu!,
in Events Archive

 Share

Recommended Posts

Bakadesu! Contributor

Bakadesu!

Posted
Posted

Initial Drift is proud to present, in association with Evo Motorsport:

D-DAY CHAMPIONSHIP NSW 2005 - ROUND 3 at Wakefield Park.

The third round of the Initial Drift D-Day drift championship 2005 will be held at Wakefield Park on the 2nd of July 2005. A full morning of practice, followed by qualifying, then a top sixteen battle to win!

Spectators more than welcome. Full cafe facilities and plenty of parking available at the track.

DETAILS:

  • Gates open at 7:30 AM
  • Entry is $100 for club members, $150 for non-members.
  • You will either require a CAMS L2NS licence, CAMS day licence or Wakefield Park licence, all of which are available on the day.
  • Please register HERE. Payment up front will secure you a spot.
  • All cars must pass CAMS scrutineering - no fluid leaks, batteries must be clamped securely, seats and seatbelts must be safe, any harnesses and roll cages must be safe etc.
  • All drivers must wear non-flammable clothing neck to ankle to wrist, and wear a Australian Standards 1698 approved helmet (like a motorcyle helmet).
  • Judging and full commentary by the Initial Drift council.
  • For directions to Wakefield Park, CLICK HERE.
  • Wear warm clothes - this is Goulburn in July we're talking about.
  • Bring lots of tyres!

The results from Round 1, which was held on the same track, were as follows:

1)Michael Spencer - lime green Onevia

2)Chris Easton - black/silver R31

3)Greg Host - black JZX90 Mark II

4)Stuart Borrows (Noddy) - maroon R33 GTS-t

5)Jarich Van Horch - light blue Gazelle

6)Pete Carruthers (Fatz) - black R31

7)Nathan Weissel - blue VL turbo

8)Mark Watling - Multi-Colour R31

9)Fernando Wiehrl - black/gold Sileighty

10)Anthony Bilic - dark green S13 Silvia

Edit for Skylines Australia forum: Look at that - four out of the top ten were Skylines. Come along and prove you're better than Fatz and Chris. :)

Round two results will be updated here soon.

Prizes include a Hybrid FMIC kit OR a DRFT body kit, an X-Force stainless steel turbo-back exhaust system and an X-Force stainless turbo manifold.

A pack of cable ties is awarded for the best crash, as well as trophies for podium finishers.

Take a look at some of the photos from round two HERE and round one (as seen in Drift Battle magazine) HERE.

  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...