Jump to content
SAU Community

Recommended Posts

www.r31skylineclub.com

1/2 a million if you look after it.   There are people on that forum who turbo'd their RB30 at 300,000 and have done another 100,000+ since then.

yes andthen there are the ones who have done it and been disappointed when all their boost ends up in the sump.

RB30's are build for 400,000km but obviously you have to look after it to see it reach that number.

I'm not sure of lifespans on RB30ET's (Probably something similar), but RB30E's are definetly built for that long.

one of australia's strongest motors.

only thing is.. I'd be wary an actual rebuild.. as the rebuild doesn't tend to last as long as the original, depending on who has done it..what components used, etc. Especially if it has been done by your "average garage" just getting the n/a back on its feet to be driven some more, and with no performance goals in mind.

Turbo'd mine at 208'000kms lasted 12 months on 280rwHP :thumbsup:

RB30 could die just like any other motor if not looked after, to hard to say whether the one your looking at with 200'000kms is OK

Same as Taxis some of them go for 1/2 a million K's on original motor, some die early....

generally the RB30 has a very good rep for reliability.

Ancilarys such as P/Steer pumps, AC, Water pumps etc etc will die just like everything else with age :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...