Jump to content
SAU Community

Newbie with questions!


Recommended Posts

Hi, I'm fairly new to posting, have searched the forums for answers but get nothing specific so sorry if you have heard it all before:-

Got a stock R33 (Auto) Series1, have a 3" Exhaust from cat back, blow off valve and air pod. When I am at low revs around the street I accelerate, then let my foot off.....it then drops revs to about 500 and almost stalls, or it has even stalled once or twice which is not good. Any ideas? I tried putting a stronger earth for the fuel pump but no change.

Also driving at about 60km, the car sort or drops down then picks up then drops down, kinda like changing gears, but my foot isn't on the accelerator very much.

Hmmmm............

Link to comment
Share on other sites

sounds like you might have a head gasket or dropped cylinder problem....get it pressure tested at a mechanics (in your capital city) and see what they say

another thing it could be is the air/fuel mix. If the Air Control Filter (which is electronically controlled) is acting up and not closing properly you will be getting air intake when your not supposed to and causing a drop in revs.....

also check the Oxygen sensor

Link to comment
Share on other sites

  • 2 weeks later...
Got a stock R33 (Auto) Series1, have a 3" Exhaust from cat back, blow off valve and air pod. When I am at low revs around the street I accelerate, then let my foot off.....it then drops revs to about 500 and almost stalls, or it has even stalled once or twice which is not good.  Any ideas? I tried putting a stronger earth for the fuel pump but no change.

I have this problem too.

You have to do 2 things to reduce the effects of this problem.

1) Clean the throttle body

2) Raise the idle RPM

Note that it doesn't get rid of it entirely. However the car becomes very much less prone for a stall after acceleration.

I have also heard replacing the AFM will also help.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hi I wanted to see if anyone knows the name of the OEM R32 rims because I can't find it anywhere
    • Gates is saying the same thing. They think I have the right bag with the wrong hose in it... I bought it off amazon, I'm thinking someone pulled a good old swapparoo and returned normal hose. Well looks like she's coming back out... Not very lucky with this hose lol. 
    • Chatting one someone recently at racing them at QR. They say you can't take turn 2 in one flat stick in 4th. They don't have the torque to pull them selves straight, so make sure you're ringing it's neck out in 3rd instead
    • Many years ago when I bought my FG XR6T, it came with bald tyres on the back (think pretty much smooth for most of the tread) and brand new Kinforest cheap shit tyres on the front. In the rain, I had more grip in the bald ass tyres on the back, than the brand new Kinforest. To the point you couldn't drive off at a set of lights and turn the corner. Car would only go straight. Very quickly all four tyres were replaced.   A few years back on a VF SV6 I had, it came with brand new chineesium tyres. In the wet at 90kmh, old 1990s tray back tradie utes could corner faster than me. There was one corner on a freeway, in a 90 zone, it's not even marked to reduce speed for those curve, it's not a hard corner, I could put the LandCruiser on mud tyres through with ease (it would easily do the corner in the wet I reckon at 120kmh), the VF however couldn't get through it at 80, as it would want to slide out.   Cheap tyres aren't worth the risk. I like decent brakes, and decent grip.
    • It shouldn't swell like that, (just looked it up) it should say SAE J30R10  
×
×
  • Create New...