Jump to content
SAU Community

Recommended Posts

rust is the one thing that will completely put me off buying a car. actually there are two things.

1. heavy accident damage (ie. bent chassis)

2. rust

basically anything else can be fixed fairly easily and if you are handy you can do it yourself.

bent chassis however will never be quite the same again and rust is like cancer.

Rust and moisture in the back end of the thing is a worry? The oil pressure thing isnt great, but an important bit of advice i can give you from beign screwed by 2 different car yards, negotiate a price based around you fixing the problems...as band aids are band aids and the problem will re-surface...and not even Consumer Affairs Tribunal can help you if they cover their tracks properly..

...a55holes , im gettign rev'd up again even though its 6 years down the track:(

yes, Troys advice is sound. don't get them to fix the problems. get them to take money off the price and fix them yourself (or pay someone else). they will just patch it up if you let the dealer fix it.

Yep, by the way I've seen things done by them so far I'm pretty certain in saying they would do the job but would by no means do the best possible job.

I'm pissed I lost my $200 deposit but I'm glad I didn't buy a $7000 car that would need another $3000 spent on it, then I could have just gone out and bought an excellent example for $10k.

The inspection was carried out by the guys at Brisbane Turbo & Tuning Center Woolloongabba.

I have serious issues with btt and wouldnt trust anything they do or say

on the off chance that they got lucky and were correct, id either get the dealer to fix the problems or preferably, take it some wher eelse for another inspection

i took my car to chapman and chapman for my inspection

then gave the list of (minor) things that needed fixing back to street machines and they did an awesome job making me happy!

Thats bullcrap you lost your $200 deposit.

You have every right to get that $200 back as the car was not in the best condition.

The motor with low oil pressure alone indicates stuffed bearings, it requires a rebuild.

Unless you didn't state you will buy the car only if it comes out ok from the inspection. It obviously didn't.

Even if you don't get the money back $200 is a small price to pay. If you were to get the car and then set to work fixing all the problems you would surely find alot more problems. My house mate got a rx3 and has set about rebuilding it. So far he has spent more times fixing issues that where not detectable untill he started fix the original issues.

Also rust is like cancer. It spreads, you can never be sure you got rid of all of it and it will kill your car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...