Jump to content
SAU Community

Winter Dyno Challenge

[hamoud]

By [hamoud],
in Archived Events

 Share

Recommended Posts

[hamoud] Apprentice

[hamoud]

Posted
Posted

6o0t44.jpg

Saturday 23rd July will see the first of many events planned for this winter. As the weather is starting to get cold and the rain is slowly pestering calder park, the thought of a Dyno Day looked like a fantasy.... Until now!! Location is locked in - The date is set & The dyno is ready! Sporting a 900kw dyno we are prepared for anything. See 4s/6s/8s and the rotors go head to head to be crowned the KW king on the day. Trophies will be awarded for the highest power for each class. A BBQ will be also be running so if you get a lil hungry grab yourself a snag hot off the bbq!

Some of victorias fastest chevs, vl commodores, rotories will also be on display through out the day so bring your family and friends to enjoy the day!

A raffle ticket prize will also be running. Up for grabs will be a brand new Rajab Racing Inlet Manifold worth over $1000 OR a GARRET SPEC INTERCOOLER your choice of 1 as first prize. More information will be given as the date gets closer.

ALL CARS ARE WELCOME!

LOCATION - RAJAB RACING DEVELOPMENTS - 16 Ari Drive, Campbellfield, Victoria (Melways Reference = 7 J5)

DATE - 23rd July 2005

TIME - 9:30AM until 5:00PM

ENTRY COST FOR DYNO - $35 (for 3 runs including a printed dyno sheet)

Note: Dyno Runs are power tests only! No tuning will be available on the day! Dyno is a 2 wheel drive dyno and only support FWD or RWD. Sorry no four wheel drives :)

To enter your car into this competition please email your name, car details and which forum you're from to [email protected] . A list will be made and names will be called out on the day.

**STRICTLY NO ALCOHOL OR INDECENT BEHAVIOR WILL BE TOLERATED AT THIS EVENT BOTH IN OR AROUND THE SHOP. IF ANY ACT OF STUPIDITY IS COMMITED, POLICE WILL BE NOTIFIED ASAP**

thankyou for your time and hope to see you on the day!!

For any further enquiries pm myself or you can contact either me at [email protected] or Allan Rajab on (03)93577587.

- please keep your unneccesary comments to yourselves and keep this thread clean, thank you

Link to comment
https://www.sau.com.au/forums/topic/78919-winter-dyno-challenge/
Share on other sites
  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...