Jump to content
SAU Community

Recommended Posts

basically you just have to tighten up your aftermarket blow off valve.. or put a plate inbetween your stock blow off valve... or for that fact even remove it and just put a plateover the hole to stop it from being plumbed back or vented... that way the air will have no where to go and ;)... go back through your turbo and out your pod lol... this then making the flutter noise... there are huge debates as to whether or not this royally ****s your turbo.. its know that its not "good" for your turbo, but has been settled upon that on low boost it isnt ogin to wreck your turbo, just perhalps shorten its life.

if you want a VL sounding flutter then you will probably want to get a front mount IC if you dont allready have one as it is said to enhance the flutter noise

ive currently got my stock welded over blow off valve on my car at the moment so i get the flutter... but i usually just have my stock unwelded one on there... just felt like a bit of a change last week :)

-Ruffels

no, it whistles. like Nfsu2, fast and the furious, etc

edit: but you can achieve it to a degree by winding down the spring ie making it tighter. this will cause "reversion" which will cause the chatter noise you are talking about. There is debate as to just how bad this is for your turbo... I think so long as you have air coming out of your BOV (ie turbo is still spinning forward), it's not too bad.

++++

Greetings All.

Oh...I thought the HKS SSQ BOV made this noise...?

Bugger...

Cheers Guys,

--Tonba

++++

SSQV is the perfect sound whistling is the best sound u can ever want to have =) I have it on my 33 and its the best, Supersonic type bov, that makes those Pssh sounds, sounds better on the WRX's.

hmmm hks ssqv sounds like a bird dying or getting sucked into the turbo or something, i don't like it hey.:whatsthat

for the, as you decribed it, perfect bov sound

1. buy a vl turbo

2. make sure its an auto

3. get the biggest bov you can find

4. get a fmic so everyone can see your cars turbo

5. get a pod filter

6. tighten the bov as much as possible

7. sit at traffic lights/pedestrian crossings/intersection and hold your foot on the accelerator and brake at the same time and then back off the accelerator.

8. look around to make sure everyone is looking at you

9. take off doing a sick one wheeler :burnout:

Disclaimer:This is not intended be provoking everyone with vl turbos, only the ones that do shit like this. :sly:

PS back to the point of the thread.

You can get the "fluttering" noise too if you have an external wastegate, different gates make different noises when you back off and some seem to make an almost fluttering noise as you describe.

The bov fluttering noise everyone says is bad as its reversion but my old 33 made the fluttering noise as i had no bov at all and the hks turbo on it had no shaft play last time i checked and still worked well.

Jamie

You can get the "fluttering" noise too if you have an external wastegate, different gates make different noises when you back off and some seem to make an almost fluttering noise as you describe.

*makes Cyph3r a badge that says "I have never heard an external wastegate in my life"*

wear it proudly my good man.

perhaps someone with an external wastegate that is open to atmo will see you with it and take you for a spin to let you hear the sound that an external wastegate dumping to atmo actually sounds like.

*makes Cyph3r a badge that says "I have never heard an external wastegate in my life"*

wear it proudly my good man.

perhaps someone with an external wastegate that is open to atmo will see you with it and take you for a spin to let you hear the sound that an external wastegate dumping to atmo actually sounds like.

lmfao *grabs the badge and pins it to my shirt*

i have definately heard one before mate, i wasn't talking about when it is wide open on full boost and it roars, i was talking about on gearchanges.

maybe its just my old car and my mates car that do it and all the rest in the world don't but they distinctly made a segmented rather then continuous noise. on my mates car you could hear the bov was continously open while the wastegate "sounded" like it opened and shut a few times.

Jamie

so describe this sound.. or record it and attach here.

it could just be that the bov wasn't able to vent enough.. and therefore even though it was venting everything it could, there was still some reversion through the turbo..

I really can't see how a wastegate that needs say 15psi of pressure to open could close and open on gearchanges.

I don't see how there can be fluctuating pressure in the exhaust manifold/turbine area during gearchanges which go from 0 to somehting above the spring pressure of the wastegate to cause it to open and shut.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...