Jump to content
SAU Community

Recommended Posts

1 x RB25det std Turbo $350

Turbo has done 94,000km and has been running at 12psi for the past 2 years. No funny noises, great response, made btw 185rwkw and 210rwkw (Depending which dyno you beleive ;), i say 185rwkw is the more realistic). Very slight shaft movement, back and forth, no movement up and down. Includes factory dump pipe.

1 x Std Gtst grill $40

1 x std GTST s1 rear spoiler (burgundy) with fully working LED 3rd brake light $70

1 x std GTST s1 rear spoiler (burgundy) with slight damage on LHS corner $FREE (pick-up only)

Pics below:

Turbo pics still to come as it is stored and wrapped in the garage, but it just looks like all RB25det std turbos.

Alan

M: 0427 076490

Link to comment
https://www.sau.com.au/forums/topic/79185-fs-r33-gts-t-parts/
Share on other sites

Sorry guys, work has been a nightmare ;), i was at work all day yesterday and half day today :).

Anyway here are some pics of the turbo, as requested. I will be weighing up the turbo tomorrow and getting a price for delivering to other states during the week.

Note: In all honesty i have NOT cleaned this turbo. Notice the lack of oil leaks, etc ;).

Just a quick helpout. The RB20 lines and dump fit straight up. I sent a turbo to Brisbane a few weeks ago and it was about $20 in a box not allowing for packaging material.

1/ I suggest you look around and get an idea of what a std 33 turbo usaully go for, b4 asking "what's the best $" as a first question. So to answer your question; For you $500

2/ The turbo is already basically sold, once i get a chance to get a price for shipping, which hopefully will be tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...