Jump to content
SAU Community

Recommended Posts

Hi all

A friend of mine works for a public company in the city and they are looking to get their website re-done.

I can do website design as can he along with other IT things but as it's a public company, they want a good size firm with nice offices etc.

If anyone works for a company that does design and construction of websites can they get in touch please so I can see if you as a company are what he is after. I am not taking a cut but acting more as a resource for him.

Alternatively if anyones company has had a site built by a good size firm, can they let me know so I can view their portfolio etc please.

By good size I mean at least 10.

Thanks in advance and if anyone has anything they dont want to post for whatever reason, PM me. :cheers:

I know lots of designers if you just need pretty pictures, but for the whole shebang:

RareMedia

-------------

contact : Andrew Davidson (director)

phone : 9646 2544

email : [email protected]

web : http://www.rare.com.au

http://www.day3.com.au

I work for them as a web designer.

We mainly do customised solutions for medium to large companies using PHP, Cold Fusion, ASP, Dot Net.

Give me a call if your friend needs some friendly advice.

0438 0222 88

You could always email Christian (PRANK) the owner and creator of this site.

It is one of the biggest auto related forums in Australia after all.

Email

[email protected]

[email protected]

http://www.skylinesaustralia.com/forums/se...=mailmember&u=3

Website

http://www.cbweb.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...